ARUBA 303 SERIES CAMPUS ACCESS POINTS JZ320A

SPECIFICATIONS Hardware Variants • AP-303: Internal antenna models. Wi-Fi Radio Specifications • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO • 5GHz (radio 0): - Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2SS VHT80 client devices - Two spatial stream Multi User (MU) MIMO for up to 867 Mbps wireless data rate to two 1SS MU-MIMO capable client devices simultaneously • 2.4GHz (radio 1): - Two spatial stream Single User (SU) MIMO for up to 300 Mbps wireless data rate to individual 2SS HT40 client devices • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio • Supported frequency bands (country-specific restrictions apply): - 2.400 to 2.4835GHz - 5.150 to 5.250GHz - 5.250 to 5.350GHz - 5.470 to 5.725GHz - 5.725 to 5.850GHz • Available channels: Dependent on configured regulatory domain • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum • Supported radio technologies: - 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) • Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM • Transmit power: Configurable in increments of 0.5dBm • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): - 2.4GHz band: +21dBm (18dBm per chain) - 5GHz band: +21dBm (18dBm per chain) - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain