5.0/ 5.0
100% pembeli merasa puas
3 rating • 2 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 7
Subtotal
Rp230.000
ESP8266 ESP12 Downloader Programmer Burner Adapter Development Board
Rp230.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ESP
ESP8266 Programmer ini sangat cocok untuk Anda yang membuat alat menggunakan ESP8266nya saja tanpa modul
Spesifikasi:
- Micro USB Type B Plug
- CH9102 USB serial TTL chipset
- Provide all I/O pin for the ESP8266 module
- Build-in reset button and Bootloader button.
- Dapat diprogram di Arduino IDE
This downloader is for modules such as ESP-12S/ESP-12F/ESP-12E/ESP-07/ESP-07S. When the programming button is pressed, the blue programming indicator will light and the IOQ pin of the ESP8266 module will be pulled low.
Compatibility :
+ ESP-12E (ESP12E)
+ ESP-12F (ESP12F)
+ ESP-12S (ESP12S)
+ ESP-07 (ESP07)
+ ESP-07S (ESP07S)
Instructions for use:
1. Download the corresponding CH9102 serial chip driver according to the operating system and install it
2. Download the official FLASH download tool ESPFLASHDOWNLOADTOOL
3. Automatically download the firmware: press the module, insert the USB cable to supply power, cooperate with the FLASH download tool, configure the corresponding burning parameters, click START to download, the firmware burning will start, the downloader will automatically reset and make the module enter the burning mode
Manually download the firmware: Automatically download the firmware: press the module, insert the USB cable to power, open the burning software, configure the corresponding burning parameters, long press the burn button, then short press the reset button, click START to download, you can start the firmware Burn.
Spesifikasi:
- Micro USB Type B Plug
- CH9102 USB serial TTL chipset
- Provide all I/O pin for the ESP8266 module
- Build-in reset button and Bootloader button.
- Dapat diprogram di Arduino IDE
This downloader is for modules such as ESP-12S/ESP-12F/ESP-12E/ESP-07/ESP-07S. When the programming button is pressed, the blue programming indicator will light and the IOQ pin of the ESP8266 module will be pulled low.
Compatibility :
+ ESP-12E (ESP12E)
+ ESP-12F (ESP12F)
+ ESP-12S (ESP12S)
+ ESP-07 (ESP07)
+ ESP-07S (ESP07S)
Instructions for use:
1. Download the corresponding CH9102 serial chip driver according to the operating system and install it
2. Download the official FLASH download tool ESPFLASHDOWNLOADTOOL
3. Automatically download the firmware: press the module, insert the USB cable to supply power, cooperate with the FLASH download tool, configure the corresponding burning parameters, click START to download, the firmware burning will start, the downloader will automatically reset and make the module enter the burning mode
Manually download the firmware: Automatically download the firmware: press the module, insert the USB cable to power, open the burning software, configure the corresponding burning parameters, long press the burn button, then short press the reset button, click START to download, you can start the firmware Burn.
Ada masalah dengan produk ini?