PCIE to M.2 HAT+ NVME Adapter Raspberry Pi 5 Support SSD 2230 2242 - Paket 2

Kondisi: Baru
Min. Pemesanan: 1 Buah
Etalase: Raspberry
Paket 1 : Hanya PCIE to m.2 Hat+ Adapter
Paket 2 : PCIE to M.2 Hat+ Adapter + Active Cooler (warna tergantung stok)

Introduction
PCIe TO M.2 adapter for Raspberry Pi 5, supports NVMe Protocol M.2 solid state drive with high-speed reading/writing, compatible with M.2 solid state drive in 2230 / 2242 size, supports Gen2 and Gen3 modes, and supports booting PI5 from SSD.

Features
Support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency.
PCI-E×1 Gen2 or Gen3 mode.
Only supports PI5B.
Compatible with M.2 solid state drive of 2230/2242 sizes.
Onboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read/write, making the operating status clear at a glance.
HAT+ design, with on-board EEPROM chip.
Onboard power monitoring chip, for real-time monitoring of the working status of the solid state drive.
Reserved airflow vent for PI5 fans, increasing airflow, and reducing solid-state temperatures.

Note
As the Raspberry Pi does not support NVME booting, the config text should be modified.

Hardware Connection
Pay attention to the orientation of the cable and connect it as shown in the figure