Lem conveyor SC 4000(700gr) black + hardener Rema Tip Top SC 4000

SC4000 berbeda dengan SC2000 ,SC4000 lebih ramah lingkungan * Pengiriman barang hanya bisa dilakukan via darat atau laut * Dimensi kaleng : dia 11 cm x 13 cm dan dimensi botol hardener : dia 3 cm x 8.5 cm Note : Berhubung lem dan Hardener ini berbentuk liquid atau cairan, tidak bisa lolos x-ray bandara sehingga tidak bisa melewati pengiriman udara Konsultasi via wa utk pengiriman : 085216405474 Widely recognized as the world’s finest cold vulcanizing cement REMA SC2000 is the solution to your i ndustrial bonding problems. By using REMA UTR20 hardener with the SC 2000 cement natural rubber, neoprene rubber, SBR rubber and others can be bo nded to each other, fabric and to steel without the aid of heat, pressure or sp ecial equipment. Description REMA SC2000 is a two component, room temperature curing chloroprene based liquid rubber adhesive that, when catalyzed with the appropriate amount of UTR20 Hardener, yields high strength adhesions. REMA SC2000 is ideal for use in lining installations, when bonding rubber to rubber, rubber to fabric, rubber to steel, rubber to concrete, fiberglass, and urethane, as well as the splicing and r epair of fabric conveyor belting. Repair to existing ru bber lined vessels and r ubber components are also recommended. Mixing instructions The REMA SC2000 cement system is comprised of cement and hardener in the ratio of 1 Kg of cement to 40 grams of hardener. These two components must be thoroughly mixed (sti rred). The mixed portion should be used within 2 hours. General Rubber Lining Environmental Conditions Before any sandblasting, application of metal primer, adhesives or application of lining material the am bient temperature and that of the substrate must be at least + 50° F ahrenheit with a maxi mum temperature of + 104° to +113° Fahrenheit.