SE Electronics sE2200 Large-diaphragm Condenser Microphone

SpecsComponents
CapsuleHand-crafted 1" True Condenser
Power
Electrical impedance
Recommended load impedance>1k Ohms
Connectivity3-pin male XLR connector
Powering48V Phantom Power (P48 according to IEC 61938)
Sound
Polar patternsCardioid
Frequency range20 Hz - 20 kHz
Sensitivity24 mV / Pa (-32.5 dBV)
Max SPL125 / 135 / 145 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level8 dB
Dynamic range117 / 127 / 137 dB (0 / 10 / 20 dB attentuation pad)
Signal to noise ratio86 dB
Low-cut filter80 / 160 Hz, 6 dB / Oct, switchable
Attenuation pad-10 / -20 dB, switchable
Current consumption4.2 mA
Dimensions
Mic Diameter51 mm (2.01 in.)
Mic length215 mm (8.46 in.)
Mic weight611 g (21.55 oz.)
What's in the box
sE2200 microphone
sE Isolation Pack (shock mount, pop filter)
thread adapter