Rigexpert analyzer AA-1500 ZOOM RIGEXPERT AA 1500

RigExpert AA-1500 ZOOM. Specifications Frequency range: 0.1 to 1500 MHz Frequency entry: 1 kHz resolution Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohms systems SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode R and X range: 0…2000, -2000…2000 Display modes: SWR, return loss, R, X, Z, L, C, Magnitude, and Phase Angle at a single frequency, SWR chart (100 points). SWR chart at fixed HAM bands by IARU Regions (100 points), Cable tools (Velocity factor amp; Cable length measurer, Stub tuner, Cable loss chart, Cable impedance chart), TDR Optional open-short-load calibration in SWR, R, X, or Smith/polar chart graph modes. RF output: – Connector type: N – Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used. – Output power: -10 dBm (at 50 Ohm load) Power: – Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA – Max. 3 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used – When the analyzer is connected to a PC or a DC adapter with a USB socket, it takes power from these sources Interface: – 320×240 color TFT display – 6×3 keys on the water-proof keypad – Multilingual menus and help screens (English – Spanish – Japanese) – USB connection to a personal computer – Bluetooth v. 4.2 (Single-mode, Class B) Accessories inside the box: Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter Dimensions: 23x10x5.5 cm (9x4x2”) Operating temperature: 0…40 °C (32…104 °F) Weight: 650g (23 Oz)