New Tiny Spectrum Analyzer TinySA ULTRA 4" Display 100kHz To 5.3GHz With 32GB Card Version V0.4.5.1 Network Internal Lan Tester

Brand Name : SeeSii
Origin : Mainland China
Certification : CE
Hign-concerned Chemical : None


2023 New Handheld Tiny Spectrum Analyzer TinySA ULTRA 4" Display 100kHz to 5.3GHz with 32GB Card Version V0.4.5.1

Specification

Parameter

Specification

Display size

4 TFT LCD (480320)

Max low input frequency

800MHz, 6GHz in Ultra mode

Resolution filters in 1,3,10 steps

from 200Hz to 850kHz

Max output frequency

Sinus up to 800MHz, Square wave up to 4.4GHz

output level

-104dBm to -16dBm

Ultra mode

Level calibrated up to 5.3GHz

Internal LNA gain

20dB up to 4GHz

Displayed points per scan

max 450

0-350MHz scan time

165ms

Shortest zero span time

17ms

DANL at 100MHz

-153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On)

DANL degrading in ultra mode

10dB above 2.5GHz, 25dB above 5.3GHz

Phase noise at 10kHz offset

-92dBc/Hz

Phase noise at 100kHz offset

-110dBc/Hz

Input 1dB compression level

+0.5dBm (LNA Off) / -26.5dBm (LNA On)

IIP3 without LNA

+18dBm (at least 2MHz apart) / 0dBm (500Hz apart)

IIP3 with LNA

-8dBm (at least 2MHz apart)

Frequency stability

<1ppm ( -10 ~ +55)

SD card slot

micro SD card

Audio out

3.5mm headphone plug

FW update mode activation

Push jog button before switch on

Maximum current consumption

330mA

Maximum charging current

1300mA

Battery

Li-polymer 3.7V 3000mAh

RF connectors

SMA female

Communication Interface

USB-CDC(Type-C)UART-TTL(2.54mm Connector)

Appearance Size

117x72x23mm (Excluding protruding parts)

TinySA model comparison table

tinySA

tinySA Ultra

Display size

2.8 inch

4 inch

Max low input frequency

350MHz

800MHz, 6GHz in Ultra mode

High input range

240MHz - 960MHz

Not available

Resolution filters in 1,3,10 steps

from 3kHz to 600kHz

from 200Hz to 850kHz

Max low output frequency

350MHz

Sine wave up to 800MHz, Square wave up to 4.4GHz

Low output level

-76dBm to -7dBm

-104dBm to -16dBm

High output frequency range

240MHz - 960MHz

Not available

High output level

-32dBm to 16dBm

Not available

Ultra mode

Not available

Level calibrated up to 6GHz

Internal LNA gain

Not available

20dB up to 4GHz

Internal step attenuator

Normal: 0-31dB, High: NA

0-31dN

Displayed points per scan

max 290

max 450

0-350MHz scan time

405ms

165ms

Shortest zero span time

1.8ms

17ms

DANL low input at 100MHz

-146dBm/Hz

-153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On)

DANL high input at 880MHz

-163dBm/Hz

Not available

DANL degrading in ultra mode

10dB above 2.5GHz, 25dB above 5.3GHz

Phase noise at 10kHz offset

-83dBc/Hz

-92dBc/Hz

Phase noise at 100kHz offset

-98dBc/Hz

-108dBc/Hz

Low input 1dB compression level

-0.5dBm

+0.5dBm (LNA Off) / -26.5dBm (LNA On)

IIP3 without LNA

+24dBm

+18dBm (at least 2MHz apart) / 0dBm (500Hz apart)

IIP3 with LNA

Not available

-8dBm (at least 2MHz apart)

SD card slot

Not available

micro SD card

Audio out

Not available

3.5mm headphone plug

FW update mode activation

Via DFU menu

Push jog button before switch on

AM modulation depth

Fixed 30%

10

FM deviation

4kHz or 75kHz

1kHz to 300kHz

Modulation frequency

50Hz to 5kHz

50Hz to 5kHz(AM) or 1kHz(FM)

Package includes:

Host (with 3000mAh battery, 4"display) x 1
USB Type-C data cable x1
30cm ALSR100 SMA cables x2
SMA-SMA barrel connector x1
Antenna with SMA connector x1
Lanyard and touch plectrum x1
32GB MicroSD card(plugged in the host) x1