H3C router LS-5130S-52S LI GL ethernet switch 52port

Switching capacity : 176Gbps
acket forwarding rate : 132Mpps
Dimensions (H × W × D) : 43.6 × 440 × 230 mm
Console ports : 1
Service ports : 48-port 10/100/1000Base-T ; 4-port SFP+
Input voltage range : 100 VAC to 240 VAC @ 50 Hz/60 Hz
Power consumption : MIN AC: 19W ; MAX AC: 44W
Operating temperature : 0ºC to 45ºC
Operating humidity : 10% RH to 90% RH, non-condensing
Stacking : Intelligent Resilient Framework 2 (IRF2)
Link aggregation :
- GE/10GE port aggregation
- Static aggregation
- Dynamic aggregation
- M-LAG

Jumbo frame : Supported
MAC address table : Blackhole MAC address ; MAC learning limit
Flow control : 802.3x flow control and half-duplex backpressure
VLAN :
- Port-based VLAN
- QinQ
- Voice VLAN
- MAC VLAN

ARP : ARP Detection ; ARP speed limit
ND : Supported
VLAN virtual port : Supported
DHCP :
- DHCP Client
- DHCP Snooping
- DHCP Relay
- DHCP Server
- DHCP Option82

DNS : Static and Dynamic DNS ; IPV4 and IPV6
Routing protocols : IPV4/IPV6 static routing ; RIP/RIPng, OSPFV1/V2/V3
Strom suppression :
- Storm suppression based on port bandwidth percentage
- Storm suppression based on PPS

Layer 2 ring network protocol :
- STP/RSTP/MSTP
- STP Root Protection
- Smart Link
- RRPP

Mirroring : Flow mirroring ; Port mirroring
QoS/ACL :
- Packet filter
- Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR
- Bidirectional ACL
- Port-based speed limit
- Flow redirection
- Time-range

Layer 2 ring network protocol :
- STP/RSTP/MSTP
- STP Root Protection
- Smart Link
- RRPP

Security :
- Hierarchical user management and password protection
- MAC-based authentication
- 802.1X
- SSH2.0
- Port isolation
- IP source guard
- HTTPs
- EAD

Loading and upgrading : Loading and upgrading through FTP/TFTP
Management and maintenance :
- Configuration from CLI
- Login through Telnet, and the console port
- Simple Network Management Protocol (SNMP)
- Remote Monitoring (RMON)
- IMC network management system