MG PZEM-031 DC 6.5-100V 20A 4 in 1 Digital Display LCD Screen

PZEM-031 DC 6.5-100V 20A 4 in 1 Digital Display LCD Screen Voltage Current Power Energy Meter * Produk ini tidak mendukung pembayaran sistem COD * Mohon chat untuk mendapatkan harga Special * Produk ini pre order dengan pengiriman 7-15 hari dari Singapore * Mohon dokumentasikan saat membuka kemasan seperti video UNBOXING * Terima kasih dan Jangan Lupa Follow Toko kami ya, Happy Shopping Function: 1. Electrical parameter measurement function (voltage, current, active power, energy). 2. Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm). 3. The reset function of energy key. 4. Store data when power off. 5. Large-screen LCD (display voltage, current, active power, energy at the same time) 6. Backlight function. Display format: 1.Power: test range: 0~2kW Within 1KW, the display format is 0.0~999.9W; 1KW and above, the display format is 1000~2000W. 2.Energy: test range: 0~9999kWh Within 10KWh, the display format is 0~9999Wh; 10kWh and above, the display format is 10~9999kWh. 3.Voltage: test range: 6.5~100V Display format: 6.50~99.99V 4.Current: test range: 0~20A Display format: 0.00~20.00 Key 1.Backlight control Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off. 2.Reset energy Step1: Long press the key until the power display area display CLr, then release the key. Step2: At this moment, the energy is flashing to prompt this is the energy reset state, if short press the key again, then the energy value is cleared and exit the reset flashing state. Step 3: If there is no operation within 5 seconds, it means the energy value is not cleared and will exit the reset state. 3.Set voltage alarm threshold Step1: Long press the key until the power display area display SET, then release the key. Step2: After enter this state, the voltage MG1111791