Electromagnetic Flow Meter - PMF-G-DN40

Electromagnetic Flow Meter adalah sejenis pengukur kecepatan, yang memiliki akurasi dan keandalan tinggi, mengadopsi sensor dan konverter cerdas sehingga tidak hanya memiliki pengukuran, tampilan, dan fungsi lainnya,tetapi juga mendukung transmisi data jarak jauh, remote control nirkabel, alarm dan fungsi lainnya. Ini banyak digunakan dalam minyak bumi, teknik kimia, baja, makanan, listrik, kertas, pengolahan air, pasokan air, pasokan panas, perlindungan lingkungan dan industri lainnya. Spesification : Nominal Diameters: DN (mm) 40~1200mm Velocity Range: 0 – 10 m/s Degree of accuracy :±0.5%R Medium Conductivity: ≥ 5uS/cm，actual conductivity ≥ 30uS/cm Nominal Pressure : 1.0MPa 1.6Mpa 2.5Mpa DN40-DN800 DN100- DN800 DN100-DN600 Environment Temperature : Sensor 0℃ – 80℃ or -25℃ – +120℃ or +70℃ -+250℃ Highest Medium Temperature: CR chloroprene rubber liner (CR): +80℃ Fluorosilicone rubber(FVMQ): +70℃ – +250℃ Polytetrafluoroethylene lining(:F4) +80℃ or +120℃ Politef lining(F46) Teflon(PFA) Output Signal: 4 – 20mA； Pulse/Frequency 2kHz(Default)，5KHz(Max); RS-485 Supply Voltage: 110/220VAC(100-240VAC), 50Hz/60Hz; 24VDC 土10% Cable entry size: M20 × 1.5 (Standard nylon waterproof connector, optional explosion-proof metal connector) Digital Communication :RS-485, Support Standard MOD BUS-RTU Protocol; GPRS Signal Electrode and The Ground Electrode Material :Stainless steel 316L, Hastelloy C, Hastelloy B, titanium, tantalum, platinum Number of Electrodes: Standard configuration 3-4 electrodes (two measuring electrodes plus a grounding electrode), according to the caliber configuration Connecting Flange Material : Standard carbon steel and stainless steel are needed to be customized Grounding Ring Material : Stainless steel, and stainless steel that contains molybdenum, etc. DN100-DN400; Stainless steel 1Cr18Ni9Ti(Ordinary austenitic stainless steel SUS321) Protection Level : Separate body-type IP68、 IP65 Incorporate type IP65