Etherent Remote IO Module M120T (4DIN+4AIN+2AO+4DO) adalah kelas industri, desain terisolasi, keandalan tinggi, stabilitas tinggi, dan modul akuisisi data presisi tinggi, MCU Mikroprosesor Kinerja Tinggi 32-Bit tertanam, modul Ethernet adaptif 1 Industri 10 / 100M terintegrasi di dalamnya. Ini menyediakan multi I / O, mendukung Modbus TCP standar, dapat diintegrasikan ke dalam SCADA, server OPC, dan sistem otomasi lainnya. Ini dirancang untuk bekerja di lingkungan aplikasi industri yang keras, banyak digunakan dalam berbagai otomasi industri, sistem pemantauan keamanan, sistem pengukuran dan kontrol otomatis.
Spesification :
Ethernet Remote I/O Module Specifications
Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=0 ;Off: open=1
Wet Contact (DI to COM) : On: 10 to 30 VDC =1;Off: 0 to 3 VDC=0
Counter Frequency : 700khz(Only the 1st Channel can be used as high speed pulse counter)
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms
Digital Output
Type : Sink
I/O Mode : DO
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Analog Input
Type : Differential input
Resolution : 12 bits
I/O Mode : Voltage / Current (jumper selectable)
Input Range : 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Analog Output
Type : Differential input
Resolution : 12 bits
Output Range : 0 to 10 VDC
LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Serial Port
RS485 : MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection : 15KV ESD Protection
Modbus Slave address : 1~255
Baud Rate : 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers : Bit Type: 300 Registers, 16-Bit Type: 300 Registers.
Noted :
Untuk Detal Silahkan Hubungi kami,.