Ethernet Remote IO Module M150T

Ethernet Remote IO Module M150T (8DIN+4AIN+4DO,High speed pulse counter,pulse output) adalah antarmuka RS485, melalui bus RS485, dapat mengalirkan perangkat Modbus RTU I / O atau pengukur Modbus RTU, misalnya: berbagai input digital atau output digital, input atau output analog, kombinasi modul IO resistansi termal, menghemat biaya. Pada saat yang sama, modul I / O Jarak Jauh Ethernet memiliki fungsi pemetaan register, data Modbus RTU I / O kaskade secara otomatis dikumpulkan ke area memori pemetaan, permintaan Klien Modbus TCP tanpa menunggu kemudian bisa mendapatkan respons cepat untuk memenuhi persyaratan tepat waktu industri.

Spesification :
Ethernet Remote I/O Module Specifications

Digital Input
Sensor Type : Wet Contact (NPN or PNP), Dry Contact
I/O Mode : DI or Event Counter
Dry Contact : On: short to GND=0 ;Off: open=1
Wet Contact (DI to COM) : On: 10 to 30 VDC =1;Off: 0 to 3 VDC=0
Digital sampling frequency : 500Hz
Digital filtering strategy : Continues 3 times
Isolation : Optical Isolated,3k VDC or 2k Vrms

Digital Output
Type : Sink
I/O Mode : DO
Pulse Output Frequency : 10Hz~300KHz(Only the 1st Channel can be used as high speed pulse outputs)
Over-Voltage Protection : 50 VDC
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Load Current : Max. 500 mA per channel
Digital sampling frequency : 500Hz

Analog Input
Type : Differential input
Resolution : 12 bits
I/O Mode : Voltage / Current (jumper selectable)
Input Range : 0 to 10 VDC, 0 to 20 mA, 4 to 20 mA, 4 to 20 mA
Accuracy :±0.1% FSR @ 25°C
Sampling frequency : 20Hz

LAN
Ethernet : 10/100 Mbps, RJ45 ports
Protection : 15KV ESD Protection
Protocols : Modbus TCP, TCP/IP,TCP Server,TCP Client

Serial Port
RS485 : MODBUS- RTU Protocol, Modbus-ASCII Protocol, Modbus Master or slave.
Protection : 15KV ESD Protection
Modbus Slave address : 1~255
Baud Rate : 1200,2400,4800,9600,19200,38400,57600,115200,128000Bps;
Mapping registers : Bit Type: 300 Registers, 16-Bit Type: 300 Registers.