Arduino Water Flow Sensor Meter Kontrol FS300A 1-60L/mnt Ukuran 3/4

This flow sensor can be used to calculate the volume of water flowed through the inlet pipe through the outlet pipe. Channels 3/4 oth straight inlet and outlet. Made of quality nylon material and resistant to heat temperatures (max 120 degrees C). Bearing inside the impeller is made of stainless steel that is resistant to corrosion so that the age of use becomes more durable. Order of cable: -Red- DC input voltage -yellow- Signal output -black- Ground FLow Flow: 1-60 L / min Media: Water, Thick Oil, Gasoline, Solar Accuracy: 1% Minimum Working Voltage: DC4.5 5V-24V Maximum Current: 15 mA (DC 5V) Working Voltage Range: DC 5 ~ 18 V Load Capacity: 10 mA (DC 5V) Frequency: F = 5.5 * Q (L / Min), error: 2% Voltage: 3.5-24VDC, current cannot exceed 10mA, 330 pulses / liter, F = constant * flow unit (L / min) * Time (seconds). Operating Temperature: 80C, operating humidity: 35% ~ 90% RH Maximal Pressure: 17.5 Kg Temperature: -25 ~ + 80C Cable length: 15cm # pertamin # flowsenso # plastic