G6 Robotic Arm Claw Hand Gripper Servo Compatible With MG996 Gimbal

Material : Composite Material Origin : Mainland China Recommend Age : 12+y Tips This product requires a certain degree of DIY ability and common sense of robot installation and debugging. Buyers are required to have a certain degree of patience. The owner will provide certain technical support. However, returns that are not product quality problems are not accepted. Please forgive me. Those who disagree should be careful to buy . The documentation is available at:,, or the document link described, please check carefully. Product Introduction The claw is made of thickened full hard aluminum alloy with beautiful and practical appearance. The claw adopts a toothed structure on both sides, which makes the claw grasp objects firmer and more stable, and is an indispensable artifact for grasping objects. Standard steering gear can be installed, perfectly compatible with MG995 MG996 MG946 SG5010. Features Single manipulator claw parameters Paw material: hard aluminum alloy Claw weight: about 40g (excluding steering gear) Maximum paw opening angle spacing: 86mm The overall length of the paw: 83mm (the longest overall length when the paw is closed) The overall width of the claw 1: 150mm (the maximum overall width when the claw is opened) Overall paw width 2: 55mm (the maximum overall width when the paw is closed) The overall thickness of the claw: 54mm (the maximum overall thickness of the claw with a steering gear) Steering gear MG996R steering gear, please refer to details