Magnustek M-CF04 XLR Audio SC Fiber Extender 4 Port One Way 20KM

4 Channels XLR Audio Fiber Optical Extender via SC Fiber Optical up to 20km XLR Balanced Extender Audio Transmitter Receiver Kit
Introduce:

1.Four channels one-way XLR audio optical fiber transmission, with a default distance of 20KM (0-120KM optional)
2.High speed synchronous digital transmission technology
3.The optical dynamic technology is adopted, and no adjustment is required during use
4.No electromagnetic interference, no radio frequency interference, no ground current
5.Ensure safe transmission in harsh electromagnetic environment
Description:

Audio character
Audio input impedance:10K
Audio output impedance:600Ω
Interface mode:Balanced XLR
Input/output amplitude ratio:1/1
frequency response:20HZ-20KHZ
Audio sampling rate:24bit/96KHZ
Signal-to-noise ratio:≥75dB
Audio interface:XLR
optical character

Transmission wave length:TX:1310nm,RX:1550nm
Optical interface:FC/SC(Default SC standard)
Transmitting optical power:Max 10dB/20KM
Receiving sensitivity:-35@155MB/S
Optical dynamic range:-39dB~-42dB
Optical allowable maximum chain loss:25dB
Transmission distance:20KM(Single mode)
optical character

Transmission wave length:TX:1310nm,RX:1550nm
Optical interface:FC/SC(Default SC standard)
Transmitting optical power:Max 10dB/20KM
Receiving sensitivity:-35@155MB/S
Optical dynamic range:-39dB~-42dB
Optical allowable maximum chain loss:25dB
Transmission distance::20KM(Single mode)
Installation Process:

1,Connect the audio signal source to the transmission end of XLR audio fiber extender;
2,Connect the receiving end of XLR audio fiber extender to the audio and power amplifier;
3,Connect the optical fiber interface between the sender and the receiver with one optical fiber cable;
4,Connect the sender and the receiver to the power supply. When the indicator lights up normally, the system operates normally
Package:

1 x XLR transmitter
1 x XLR receiver
2 x Power adapter
1 x User manual