ICOM RADIO TRANSCEIVER HF - F8101 ALE

https://www.icomjapan.com/lineup/products/IC-F8101/ Frequency coverage Receive 0.5–29.9999 MHz Transmit 1.6–29.9999 MHz Number of channels 500 channels Type of emissions Australia version J3E, A3E (RX only) Export/USA versions J3E, A3E, A1A, F1B, J2B Power supply requirements 13.8 V DC Negative ground 10.8–15.6 V (Australia versions) 11.73–15.87 V (Export/USA versions) Current drain Receive Less than 3 A (Max. audio), 1.0 A (Stand-by) Transmit Less than 28 A (Maximum output) Dimensions (W×H×D) (Projections not included) 174×62×259 mm; 6.85×2.44×10.2 in (Controller attached type) Weight (approx.) 3.9 kg; 8.6 lb (Controller attached type) Transmitter Output power Australia version J3E: 100, 50, 10 W PEP (typical) Export/USA versions J3E/A1A: 125, 50, 10 W PEP (typical) A3E: 30, 12.5, 3 W (typical) F1B/J2B: 75, 50, 10 W PEP (typical) Spurious emissions 64 dB below PEP typical (EXP/Australia versions) 64 dB below PEP (USA versions) Receiver Sensitivity (at 10dB S/N) J3E (Pre-amp. ON) 0.5–1.5999 MHz: 14 dBμV 1.6–29.9999 MHz: -14 dBμV A3E 0.5–1.5999 MHz: 22 dBμV 1.6–29.9999 MHz: 6 dBμV Squelch sensitivity J3E (at 13.5 MHz) Threshold: Less than +20 dBμV Tight: Less than +90 dBμV A3E (at 1.000 MHz) Threshold: Less than +30 dBμV Tight: Less than +110 dBμV Spurious responses More than 70 dB Audio output power 4.0 W at 10% distortion with a 4 Ω load Applicable U.S. Military Specifications amp; IP Rating Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards. Tested to IC-F8101, AD-119, CFU-F8100 and MB-126. Standard MIL-810 G