New Portable RF spectrum analyzer Arinst SSA R2 up to 6.2 GHz

Portable RF spectrum analyzer Arinst SSA R2 up to 6.2 GHz
Item specifics
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more
MPN:Does Not Apply
No Brand: Kroks
Model: Arinst SSA R2
Country/Region of Manufacture: Russian Federation
Analyzer Type: Spectrum Analyzer
Basic functions of the analyzer software:
Specifications:
Displayed frequency range: 35 — 6200 MHz
Measured frequency range: 35 — 4500 MHz
Dynamic range for 35-3000 MHz band: 75 dB
Dynamic range for 3000-4500 MHz band: 70 dB
Maximum Span: 6165 MHz
BW: 200 kHz, fixed
Scan speed for a viewing band of more than 100 MHz: 700 MHz/sec
Sweep 100 MHz: < 0.25 sec
Noise floor up to 3000 MHz: < - 90 dBm
Noise floor 3000 - 4500 MHz: < -85 dBm
Noise floor 4500 - 6200 MHz: < -80 dBm
Wave impedance: 50 Ohm
SWR at the operating frequency range: < 1,5
Internal attenuator: 0 — 30 dB
Error with attenuation up to 10 dB: 2 dB
Error with attenuation from 10 to 20 dB: 5 dB
Error with attenuation from 20 to 30 dB: 8 dB
Accuracy within the dynamical range: 2,0 dB
Maximum input power at attenuator 0 dB: 10 dBm
Maximum input power when the attenuation is above 20 dB: +20 dBm
Maximum input measured signal: +10 dBm
Maximum input DC voltage: 25 Volts
Maximum current consumption when running on battery: 350 mA
Maximum current draw when running from USB: 500 mA (when charging)
Battery: 2000 mAh
Time battery life: 4 hours
Battery charging time: ~ 5 Hours
Items included in the box:
Spectrum analyzer Arinst SSA R2
Battery (pre-set inside the device)
HF adapter SMA(male)-SMA(female) to protect the HF connector from wear-and-tear
USB – mini-USB cable to charge the device and for data transmission
Happy shopping at the MIUNLIPUS STORE