Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: Sisa 1

Subtotal

Rp2.500.000

rc car engine sirio 21 3.5cc (s21-bk)

Rp2.500.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: engine
Specification: Displacement: 3.5cc. Stroke: 16.62mm. Bore: 16.35mm. Ports: 5+2Pistons: CNCSleeve: ABCExhaust: RearWeight: 370gCranshaft: Ø14.20mm SG TypeCarburetor Type: Plastic Slide Single AdjPlug Type: Standard/Turbo

Instructions 
Running In:

For a correct setting of the sliding parts is required 15 minutes about of running in.In course of execution keep a low rpm zone by avoiding sudden acceleration.Mixture with nitromethan not higher of 15% is suggested.A previous carburettor check let obtain the optimum carburation by a minimum rotating of base and speed needles.

Joints 
Any joint must be made before starting and according to the instruction given by the producer of the car model on which the engine are assembled:

Connect the inlet manifold and exhaust system to the drainpipe.Connect the tank to the carburettorConnect tank to the pressure intake of the exhaust system.Connect carburettor to the servo control throttleConnect drive shaft to the suitable clutch of the engine

Start

Connect spark plug to the provided "plug heater"Rotate the flywheel anticlockwise (the suitable start box is suggested)Speed in moderation up by using the radio devise-control

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan