Spdif Splitter 1x3 Digital Audio VORTEX

Spdif Toslink 1 in 3 Digital Audio Splitter

Introduction
This Spdif 1×3 Splitter allows to connect 1 digital optical audio signal input device (such as TV, Xbox, Blu-ray player etc.) split it into 3 Spdif audio output device (such as amplifiers, sound bar etc.) It splits audio signal without loss of quality or degradation. Suitable for a variety of scenarios, making your life more convenient.

Features
* 1 way of Spdif signals switch to 3 sets of Spdif signal receiving device.
* Audio format support: LPCM2.0/DTS/ support Dolby-AC3
* Support 2 switching modes: button
switching and remote control switching
* Each 3 ways of spdif output port support to be controlled individually, which you can on/off any channel as you wish.
* Used optical fiber cable loss less than 0.2Db/m, Output distance up to 40m. * Over-voltage protection, It can prevent the damage caused by connecting unmatched power adapter to the machine.
* Indicator light shows working status. * Signal lossless transmission.

Specifications
Input port 1*Spdif
Output port 3*Spdif
Peak wavelength 650nm

Max baud rate | 25Mbps
Audio format | LPCM2.0/DTS/support Dolby-AC3,24bit 96Khz
Output cable distance | ≤40m(Use the optical fiber cable loss less the 0.2Db/m)
Operating temperature range | (0°C~40°c)
Operating humidity range | 5%~90%RH (No Condensation)
Power Supply | DC5V/1A
Dimension(mm) | 90X47X19

Package contens
Spdif 1x3 Audio Splitter 1 Pcs
USB Power cable 1 Pcs
Remote control(optional) 1 Pcs
User Manual 1 Pcs

-----
Note :
- Jika ada keluhan silahkan chat terlebih dahulu, komentar negatif
artinya garansi sudah tidak berlaku.
- Untuk mengaktifkan Garansi untuk produk ini wajib
memberikan bintang 5 Terima kasih, membeli artinya setuju :)
- Untuk setiap produk yang dibeli harus di Video Unboxing, sebagai bukti semisal ada komplain