PAKET POMPA OIL RACE SERIES 06-2017 TWINCAM #0932-0026 & #0925-0110

PAKET POMPA OIL RACE SERIES 06-2017 TWINCAM #0932-0026 & #0925-0110

-FEULING RACE SERIES OIL PUMPS # 0932-0026 FOR TWIN CAM 06-2017
-FEULING #0925-0110 #8015 High Flow Cam Plate - Twin Cam 06-2017

7075 billet aluminum with military spec hard anodized, blue printed and designed for the racer
The 7075 alloy is 50% harder and stronger than 6061 aluminum and holds tighter tolerance under temperature
More pressure volume and more oil pressure
More scavenge volume eliminating power robbing wet sumping, blowby and oily air cleaners
PART #0932-0026 has 20%+ more pressure and 30%+ more return volume

More horsepower, more torque, more oil pressure, more return volume
High Flow 2" Chrome Moly gerotor gears
When combined with the Feuling High Flow camplate, test results show 3 horsepower gain and 4 ft./lb. of torque gain to the rear wheel
Stock replacement for Twin Cam engines, recommended for both strip and performance street engines
Made in the U.S.A.
NOTE: Must be matched with a Feuling High Flow camplate.

FEULING #0925-0110 #8015 High Flow Cam Plate - Twin Cam 06-2017

Features
Feuling HIGH FLOW cam plates for T/C engines increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil port holes throughout the cam plate to the port holes in the engine case increasing engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings resulting in 25-35 degree cooler engine temperatures
Made from 7075 billet aluminum, which is 50% harder and stronger than the factory, SE and other aftermarket cam plates; the 7075 increases the strength and hardness of the cam plate, holding tighter tolerances under temperature, eliminating flexing and the need for bronze bushings as 7075 material has excellent bearing-like properties
For use ONLY with Feuling oil pumps