Atur jumlah dan catatan
Stok Total: Sisa 9
Subtotal
Rp117.400
HOTBED POWER EXPANSION PRINTER 3D HIGH CURRENT LOAD FET 21N06
Rp117.400
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
0A heatbed module Sizeï¼60x50mm When you connect to12V, the power is about 120W, it is recommended not to be more than 120W, When you connect to 24V, the range of power is 120W-260W. Under the premise of this module in the normal heat dissipation, the actual test in the I (Max) = 10A cases can be a stable job, in use process, the current do not more than 10A. Completely solve the hot bed power is too large and the load current issue Under the premise of normal cooling, it work stable under I(Max)=10A, the current must not exceed 10A while the process working If you need anything greater or equal to 10A this module is a must! For example, if your total power usage is 240W and you have 12V power supply, then it means at least 10A is needed (10X12=120W). As ChiTu controller board is only capable of 10A this setting will not work. To make it work, you need this extra power module
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan