Modul Receiver Amplifier RF LNA Broadband 0.1-2000MHz 30dB

Description: This product with wide frequency range, high gain, low noise figure. Apply to various RF receive front-end and increases communication distance. Used for Short wave, FM radio, remote control receiver, su as cable TV signal amplifier need low noise RF signal amplification. When working frequency is less than 500 MHz,it get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency. Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. Increase the input and output capacitance appropriately,can extend the cut-off frequency. When the power supply voltage anges in 5-8V, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, whi suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control. When the power supply voltage in the 8-10V, the low frequency end gain up to 30db, at this time the amplifier has a low noise coefficient and good ity. When the voltage is 12V, rea maximum gain, the low frequency end gain of 32.5dB. Specification: Colour: Green Material: CCL Metal Size: 53x19x7mm/2.09x0.75x0.28 in Diameter of end: 5mm Operating frequency: 0.1-2000MHz Amplifier gain: F=0.1MHz, gain=32dB F=500Mhz, gain=31dB F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB Maximum power output: 10dBm 10mW Power supply voltage: 6-12V DC System impedance: 50Ω Package Includes: 1 Piece Broadband RF Amplifier Module Note: Color maybe slightly different due to different monitor. The above size is measured by hand, please allow slightly difference. Thanks !