868MHz LoRa Radio Node V1.0 Wireless IOT Lora Module RFM95 SX1276

Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import ( Luar Negri ) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Harap Chat Terlebih Dahulu Sebelum Order Untuk Ketersedian Barang DiGudang Import Happy Shopping ! 868MHz LoRa Radio Node V1.0 Wireless IOT Lora Module RFM95 SX1276 ATmega328P 3.7-12V uFL Antenna Internet of Things FZ3338 The LoRa Radio Node v1.0 based on the ATmega328P and RFM95 radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini. This chip has 32K of flash and 2K of RAM.On board with a 3.7V 14500 battery holder, so it can use anywhere you like. In this LoRa Radio Node, 2 IIC ports, 2 analog port (A0 A1) and 2 digital port (D3 D4) with 4 pin and 3 pin 2510-I type header. Features: Power supply: 3.7V 14500 Lipo battery or 3.7-12V DC power(VCC GND: 2PIN 2510-I Type connect)Size: 40mm x 60mmATmega328P @ 8MHz with 3.3V logic/power3.3V regulator with 500mA peak current outputHardware Serial, hardware I2C, hardware SPI support1 x PWM pins: D312 x analog inputs: A0 A1Pin #13 BLUE LED for general purpose blinking2 mounting holesReset button This LoRa Radio Node uses the extra space left over to add an RFM95 LoRa 868MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz SX1276 LoRa based module with SPI interfacePacket radio with ready-to-go Arduino librariesUses the amateur or license-free ISM band: ITU Europe license-free ISM or ITU American amateur (with amateur band limitations)+5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)~300uA during full NS - 1636480