Dual Two Mode PWM Square Wave Rectangular Wave Signal Generator

Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import ( Luar Negri ) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Harap Chat Terlebih Dahulu Sebelum Order Untuk Ketersedian Barang DiGudang Import Happy Shopping ! Dual Two Mode PWM Square Wave Rectangular Wave Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module Feature: 1. PWM signal generator, square wave rectangular wave signal generator2. Used to generate square wave rectangular wave signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.3. The supporting driver realizes dimming, speed regulation, control of solenoid valve, etc., but can not directly drive the load of the electric motor solenoid valve. Product Highlights: 1. Two modes can be selected:PWM mode - frequency (continuous), duty cycle, pulse number adjustable;PULSE pulse mode - positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.2. With start and stop button, can control the output and stop of the signal3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring Technical parameters: 1. Working voltage: 3.3~30V, with anti-reverse protection2. Frequency range: 1Hz~150KHz, accuracy about 2%3. Duty cycle range: 0-100%, 1% stepping4. Number of pulses: 1-9999, or infinite (display lsquo;---- stands for infinity)5. Delay output time: 0.000s-9999s, the minimum can be set 1ms6. Positive and negative pulse width length: 0.000s-9999s, the minimum can be set 1ms7. Signal loading capacity: less than 30mA8. Output signal amplitude: amplitude is equal to the supply voltage9. Product size: 60 x 32 x 10mm10. Product Weight: 18g11. Packing: NS - 1613164