FlySky FS-BS4 2.4GHz 4CH ASHDS 2A RC Receiver PWM/PPM/I.bus/S.bus

FlySky FS-BS4 2.4GHz 4CH ASHDS 2A RC Receiver PWM/PPM/I.bus/S.bus Output with Gyroscope Function for RC Car Boat Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import (Luar Negri) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Harap Chat Terlebih Dahulu Sebelum Order Untuk Ketersedian Barang DiGudang Import Happy Shopping ! FlySky FS-BS4 2.4GHz 4CH ASHDS 2A RC Receiver PWM/PPM/I.bus/S.bus Output with Gyroscope Function for RC Car BoatOVERVIEW:FlySky FS-BS4, a gyro-embeded receiver, has 4 channels. In addition to the regular functions, it can also be used with a transmitter with S.V.C. (Smart Vehicle Control) function to realize a smart control over the car and make sure the car travels in the expected direction even on bumpy/slippery surfaces, or during cornering.Specification:Brand Name: FlySkyItem Name: FS-BS4 ReceiverDimensions: 35.4 * 29.6 * 13mm Weight: 20g PWM channels: 4CHWireless frequency: 2.4GHz Wireless protocol: AFHDS 2A Range: 100 - 300m (ground) Antenna type: single antenna (150mm) Power: 4.0-6.5V RSSI: Supported Data port: PWM / PPM / i.bus / s.bus Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: Yes Certification: CE Binding:1. Turn on the transmitter, check the RF standard and if necessary, change it to [AFDHS 2A 2-way]. For detailed instructions, refer to the transmitter s manual.2. Set the transmitter to bind mode. For detailed instructions, refer to the transmitter s manual.3. Make sure the receiver is powered off.4. Connect the bind cable to the BIND/VCC port on the receiver. Then connect the power to any other ports on the receiver. The red indicator starts to flash rapidly, indicating that the receiver is in bind mode.5. Wait till the indicator stops SKU - 1661317