UBIQUITI UAP-XG Access Point XG Dual-radio 802.11ac Wave 2

FAST MOVING STOCK Chat us before ordering Check stok sebelum order ya The Access Point XG (UAP XG) is a high-capacity, 802.11ac Wave 2 access point with (2) 5 GHz (4x4 MU-MIMO) radios that can reach a 3.466 Gbps aggregate throughput rate and supports up to 1,500 clients. This access point is powered by PoE++ and features (1) GbE RJ45 port and (1) 10GbE ICM Ethernet port to facilitate a range of connections. The UAP XG can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app. Features: • (2) 5 GHz (4x4 MU-MIMO) radios • 3.466 Gbps aggregate throughput rate over the 5 GHz band • 2.4 GHz (4x4 MIMO) band with a 800 Mbps throughput rate • 1,500-client limit • Powered by PoE++ (PoE injector included) • (1) GbE RJ45 port • (1) 10GbE ICM Ethernet port Mechanical Networking Interface : • (1) 10/100/1000 RJ45 Ethernet Port • (1) 1/10 Gbps ICM Ethernet Port Button : Reset Power Method : PoE++ Supported Voltage Range : 44 to 57VDC Power Supply : PoE Injector 50VDC, 1.2A Gigabit Max. Power Consumption : 31W Radios : • 2.4 GHz radio • 5 GHz low-band radio, ch 36-64 • 5 GHz high-band radio, ch 100-165 • 2.4/5 GHz security radio Max. TX Power : • 2.4 GHz : 25 dBm • 5 GHz : 25 dBm MIMO : • 2.4 GHz : 4 x 4 • 5 GHz : 4 x 4 Radio Rates : • 2.4 GHz : 800 Mbps • 5 GHz : 1.7 Gbps Antennas : • 2.4 GHz : (2) Dual-Port, Dual-Polarity Antennas, 6 dBi each • 5 GHz : (2) Dual-Port, Dual-Polarity Antennas, 8 dBi each Mounting : Wall/Ceiling/Junction Box (Kits Included) Operating Temperature : -10 to 60° C (14 to 140° F) Operating Humidity : 5 to 95% Noncondensing Software : WiFi Standards : 802.11 a/b/g/n/r/k/v/ac/ac-wave2 Wireless Security : WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11 w/PMF BSSID : Up to 8 per Radio VLAN : 802.1Q Advanced QoS : Per-User Rate Limiting Guest Traffic Isolation : Supported Power Save : Supported Beamforming : Supported Concurrent Clients : 1500 Garansi 1 Tahun VN240523