New driver
Atur jumlah dan catatan
Stok: Sisa 1
Subtotal
Rp292.500
Motor Driver 300W Brushless Hallless (8175) - New driver
Rp292.500
Pilih ukuran: New driver
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: DINAMO MOTOR
BLDC three-phase DC brushless with sensor Hall 24V motor fan turbine motor speed control drive controller
PWM duty cycle control, the frequency is recommended to be above 200HZ. Please specify in advance if PWM duty cycle is required!
Controller parameters:
Product Name: 300W Brushless Hallless DC Motor Driver
Model: BLDC300W24V
Working voltage: 12-60V
Maximum current: rated 16A peak 20A
Peak power: 380W
Overcurrent Protection: Yes
Product size: length 80MM* width 45MM* height 37MM
** nterface Description:
1.A B C output is connected to the three-phase motor.
2. HA HB HC Hall three-phase input, corresponding to motor ABC (UVW) phase.
3. 5V G 5V power supply and GND (power supply for Hall or potentiometer, the output current should not be higher than 100mA).
4. VCC GND controller power supply, voltage range 12-60V.
5. SP speed pulse signal output, output one pulse per phase change. .
6.FB forward and reverse control interface, connected to high level by default, if you need to reverse, pull it down or connect to GND.
7.VI speed control signal input, PWM input/0-5V analog input (0V does not turn, 5V output maximum power).
PWM duty cycle control, the frequency is recommended to be above 200HZ. Please specify in advance if PWM duty cycle is required!
Controller parameters:
Product Name: 300W Brushless Hallless DC Motor Driver
Model: BLDC300W24V
Working voltage: 12-60V
Maximum current: rated 16A peak 20A
Peak power: 380W
Overcurrent Protection: Yes
Product size: length 80MM* width 45MM* height 37MM
** nterface Description:
1.A B C output is connected to the three-phase motor.
2. HA HB HC Hall three-phase input, corresponding to motor ABC (UVW) phase.
3. 5V G 5V power supply and GND (power supply for Hall or potentiometer, the output current should not be higher than 100mA).
4. VCC GND controller power supply, voltage range 12-60V.
5. SP speed pulse signal output, output one pulse per phase change. .
6.FB forward and reverse control interface, connected to high level by default, if you need to reverse, pull it down or connect to GND.
7.VI speed control signal input, PWM input/0-5V analog input (0V does not turn, 5V output maximum power).
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan