Atur jumlah dan catatan
Stok Total: 107
Subtotal
Rp225.654
AC-DC 5V 700mA 12V 450mA 9V 500mA 3.5W Precision Buck Converter AC 220V to 5V DC step down Transformer power supply module
Rp225.654
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
1005006546384949
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : Si Tai&SH
Model Number : 5V700mA
Origin : Mainland China
Type : Module
Application : Computer
Supply Voltage : 5v 12v
Dissipation Power : 3.5w
Operating Temperature : ....
is_customized : Yes
Condition : New
Package : SMD
Hign-concerned Chemical : None
Range of application : Switch And Sensor For Arduino STM
Features and parameters introduction:
This power supply is an isolated industrial-grade module power supply, with temperature protection, overcurrent protection and short circuit protection, high and low voltage isolation, AC85~265V wide voltage input, 431 regulated DC5V output, small size, stable performance, and high cost performance
Parameter:
Input voltage AC 85 ~ 265v 50/60HZ
Output voltage DC5V (0.2V)
Output current 700mA
Power 3.5W
1
.
Use environment:
project
unit
small value
value
Test Conditions
Operating temperature
-20
60
Relative humidity
%RH
40
90
no cooling
2. Technical requirements
2.1 Input Characteristics
project
unit
small value
Typical value
value
Test Conditions
Input voltage range
V ac
85
110/220
265
under full load condition
Input Current
A
0.0273(AC110V) 0.014(AC220V)
under full load condition
Input surge current
A
20
under full load condition
2.2 Output characteristics
2.2.1 Output regulation rate characteristics
The output voltage
small current
current
peak current
Output voltage range
ripple
+5V
0A
700mA
800mA
4.80~5.2V
60mV
2.2.2 Other output characteristics
project
unit
small value
Typical value
value
Test Conditions
Output Power
W
0
4
4.5
DC output power
output efficiency
%
80
specified load
switch overshoot
%
10
Output rise time
mS
100
2.3 Protection function
project
unit
yes/no
small value
Typical value
value
Restoration features
output overvoltage
V
4.8
5.2
Locks up, restarts and restores
Output over power protection
Yes
Locks up, restarts and restores
Short circuit protection
Yes
Locks up, restarts and restores
temperature protection
Yes
Locks up, restarts and restores
Overcurrent Protection
Yes
Locks up, restarts and restores
Size: length, width and height 3*2*1.8 (cm)
Installation method:
A. The input and output terminals can be installed with pins and soldered directly on the PCB
B. Reliability requirements for glue fixing
Ambient 25, MTBF is more than 16000 hours under 80% load
Precision 5V700mA 3.5W isolated switching power supply module 220 to 5V power supply
Operating temperature: -20 degrees to 70 degrees, the green gold capacitor can withstand temperature of 105 degrees for 10,000 hours, more than 5 years at 70 degrees, about 20-50 years at normal temperature (not recommended for use above 70 degrees), high output filter Quality Solid Capacitors
Input voltage range: AC50V-277V DC70V-390V
No-load power: <0.05W Full-load power: <4W
Output characteristics: Multiple modules of the same voltage can be used in parallel to meet the needs of small space and high current.
Output voltage: 5V +-0.15V no-load and full-load, light load minus 0.1V, heavy load rises, 50% load ripple 60mV
Output current: 5V0mA-700mA, enter constant current working mode at full load
Test resistance: 7 ohms for 5V (4.9V)
Output indicator: green light
Output power: 3.5W efficiency about 80%
Output protection: over voltage, over current, over temperature, over power, short circuit protection, etc.
Operating temperature: -20 degrees to 70 degrees, the green gold capacitor can withstand temperature of 105 degrees for 10,000 hours, more than 5 years at 70 degrees, about 20-50 years at normal temperature (not recommended for use above 70 degrees), high output filter Quality Solid Capacitors
Input Features:
Input voltage range: AC50V-277V DC70V-390V
No-load power: <0.05W Full-load power: <4W
Output characteristics: Multiple modules of the same voltage can be used in parallel to meet the needs of small space and high current.
Output voltage: 12V -0.05+0.3V no-load and full-load, light load minus 0.1V, heavy load rises, 50% load ripple 100mV
Output current: 12V0mA-300mA, enter constant current working mode at full load
Test resistance: 40 ohms for 12V (12V)
Output indicator: green light
Output power: 3.5W efficiency about 80%
Output protection: over voltage, over current, over temperature, over power, short circuit protection, etc.
Features:
The product is easy to install, and the input and output can be welded with 5.08 terminals or pins.
There are installation fixing holes at the four corners, which can be fixed with screws to prevent movement or vibration. The diameter of the fixing holes is 3mm.
Universal input voltage AC100V-265V, strong versatility.
High efficiency, strong design density, small size for easy installation, and extremely low output ripple.
Input and output high isolation
Overload, short circuit and over temperature
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : Si Tai&SH
Model Number : 5V700mA
Origin : Mainland China
Type : Module
Application : Computer
Supply Voltage : 5v 12v
Dissipation Power : 3.5w
Operating Temperature : ....
is_customized : Yes
Condition : New
Package : SMD
Hign-concerned Chemical : None
Range of application : Switch And Sensor For Arduino STM
Features and parameters introduction:
This power supply is an isolated industrial-grade module power supply, with temperature protection, overcurrent protection and short circuit protection, high and low voltage isolation, AC85~265V wide voltage input, 431 regulated DC5V output, small size, stable performance, and high cost performance
Parameter:
Input voltage AC 85 ~ 265v 50/60HZ
Output voltage DC5V (0.2V)
Output current 700mA
Power 3.5W
1
.
Use environment:
project
unit
small value
value
Test Conditions
Operating temperature
-20
60
Relative humidity
%RH
40
90
no cooling
2. Technical requirements
2.1 Input Characteristics
project
unit
small value
Typical value
value
Test Conditions
Input voltage range
V ac
85
110/220
265
under full load condition
Input Current
A
0.0273(AC110V) 0.014(AC220V)
under full load condition
Input surge current
A
20
under full load condition
2.2 Output characteristics
2.2.1 Output regulation rate characteristics
The output voltage
small current
current
peak current
Output voltage range
ripple
+5V
0A
700mA
800mA
4.80~5.2V
60mV
2.2.2 Other output characteristics
project
unit
small value
Typical value
value
Test Conditions
Output Power
W
0
4
4.5
DC output power
output efficiency
%
80
specified load
switch overshoot
%
10
Output rise time
mS
100
2.3 Protection function
project
unit
yes/no
small value
Typical value
value
Restoration features
output overvoltage
V
4.8
5.2
Locks up, restarts and restores
Output over power protection
Yes
Locks up, restarts and restores
Short circuit protection
Yes
Locks up, restarts and restores
temperature protection
Yes
Locks up, restarts and restores
Overcurrent Protection
Yes
Locks up, restarts and restores
Size: length, width and height 3*2*1.8 (cm)
Installation method:
A. The input and output terminals can be installed with pins and soldered directly on the PCB
B. Reliability requirements for glue fixing
Ambient 25, MTBF is more than 16000 hours under 80% load
Precision 5V700mA 3.5W isolated switching power supply module 220 to 5V power supply
Operating temperature: -20 degrees to 70 degrees, the green gold capacitor can withstand temperature of 105 degrees for 10,000 hours, more than 5 years at 70 degrees, about 20-50 years at normal temperature (not recommended for use above 70 degrees), high output filter Quality Solid Capacitors
Input voltage range: AC50V-277V DC70V-390V
No-load power: <0.05W Full-load power: <4W
Output characteristics: Multiple modules of the same voltage can be used in parallel to meet the needs of small space and high current.
Output voltage: 5V +-0.15V no-load and full-load, light load minus 0.1V, heavy load rises, 50% load ripple 60mV
Output current: 5V0mA-700mA, enter constant current working mode at full load
Test resistance: 7 ohms for 5V (4.9V)
Output indicator: green light
Output power: 3.5W efficiency about 80%
Output protection: over voltage, over current, over temperature, over power, short circuit protection, etc.
Operating temperature: -20 degrees to 70 degrees, the green gold capacitor can withstand temperature of 105 degrees for 10,000 hours, more than 5 years at 70 degrees, about 20-50 years at normal temperature (not recommended for use above 70 degrees), high output filter Quality Solid Capacitors
Input Features:
Input voltage range: AC50V-277V DC70V-390V
No-load power: <0.05W Full-load power: <4W
Output characteristics: Multiple modules of the same voltage can be used in parallel to meet the needs of small space and high current.
Output voltage: 12V -0.05+0.3V no-load and full-load, light load minus 0.1V, heavy load rises, 50% load ripple 100mV
Output current: 12V0mA-300mA, enter constant current working mode at full load
Test resistance: 40 ohms for 12V (12V)
Output indicator: green light
Output power: 3.5W efficiency about 80%
Output protection: over voltage, over current, over temperature, over power, short circuit protection, etc.
Features:
The product is easy to install, and the input and output can be welded with 5.08 terminals or pins.
There are installation fixing holes at the four corners, which can be fixed with screws to prevent movement or vibration. The diameter of the fixing holes is 3mm.
Universal input voltage AC100V-265V, strong versatility.
High efficiency, strong design density, small size for easy installation, and extremely low output ripple.
Input and output high isolation
Overload, short circuit and over temperature
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan