5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 43
Subtotal
Rp399.500
TANG CRIMPER 3 IN 1 TEKIRO
Rp399.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Deskripsi TANG CRIMPER 3 IN 1 TEKIRO
Plug Crimper 3 in 1 - Tang Crimping Modular 6 dan 8 Pin Tekiro
- Crimps 8P8C/RJ-45, 6P6C/RJ12, 6P4C/RJ11, 4P4C/RJ9, 4P2C Modular plugs.
- Strips ,Cut round and flat cables, stripping length 1/2" and 1/4" are available for flate cable.
- Heat treatred carbon steel with green plastic handles.
How to use
- cutting modular cable . place the single-bladed side on the tool cutter facing u and cut the modular cable to the desired length.
- Stripping modular cable (flat cable). insert 4p,6p or 8p cable into the two blade side of the tool stripper and then squeeze handle until it stop.
- Stripping round cable insert the cable into the round stripping hole and turn the crimper in counter clockwise direction and cable in clockwise at the same time.
- Remove the outer jacket and insert the stripped cable into the plug . place modular plug with cable into the tools holder be sure the stripped wire is between the tab and gold contacts, squeeze handles until it stops.
- 4p holder is located on the back side of the tool.
- Suits to strip DIA 5.0 ~ DIA6.2mm UTP/STP Data cables and includes 110/88 type termination tool.
Plug Crimper 3 in 1 - Tang Crimping Modular 6 dan 8 Pin Tekiro
- Crimps 8P8C/RJ-45, 6P6C/RJ12, 6P4C/RJ11, 4P4C/RJ9, 4P2C Modular plugs.
- Strips ,Cut round and flat cables, stripping length 1/2" and 1/4" are available for flate cable.
- Heat treatred carbon steel with green plastic handles.
How to use
- cutting modular cable . place the single-bladed side on the tool cutter facing u and cut the modular cable to the desired length.
- Stripping modular cable (flat cable). insert 4p,6p or 8p cable into the two blade side of the tool stripper and then squeeze handle until it stop.
- Stripping round cable insert the cable into the round stripping hole and turn the crimper in counter clockwise direction and cable in clockwise at the same time.
- Remove the outer jacket and insert the stripped cable into the plug . place modular plug with cable into the tools holder be sure the stripped wire is between the tab and gold contacts, squeeze handles until it stops.
- 4p holder is located on the back side of the tool.
- Suits to strip DIA 5.0 ~ DIA6.2mm UTP/STP Data cables and includes 110/88 type termination tool.
Ada masalah dengan produk ini?