Happymodel ES24TX Slim Pro ExpressLRS ELRS Lite Transmitter Module

VERSI TANPA BUG TELEMETRY (SUDAH FIXED) Happymodel ES24TX Slim Pro 2.4GHz ExpressLRS ELRS Up To 1000mW RF Power High Re-flashed Micro TX Module with RGB LED Cooling Fan for FrSky X-lite/Pro X9 Lite TBS Tango2 Radio Note: The 24TX80 Antenna has change to 2.4GHz Moxon Antenna OVERVIEW: This Slim Pro TX module is designed by Happymodel and based on the open source ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drone. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX Slim Pro module is a complete solution which is already pre-load the Expresslrs firmware and its plug and play for Frsky X-lite/X-lite pro/X9 Lite, TBS Tango2. It comes with an aluminum alloy shell and is equipped with a cooling fan that automatically works when the module is working at 250mw. It supports a maximum power output of about 1000mw, this would be very useful for Long Range FPV. Specifications: Brand Name: Happymodel Item Name: ES24TX Slim Pro Micro TX Module Model: ES24TX Slim Pro Regulatory Domain: ISM2400 MCU: ESP32(main),ESP8285(as ESP backpack) RF chip: SX1280IMLTRT Frsky Lite 8pin socket Frequency Range: 2400 MHz to 2500 MHz Maximum receive refresh rate: 500Hz Minimum receiver refresh rate: 25Hz RF Output Power: ≤30dBm Power supply voltage: 5v~12v Weight: 50g (without antenna） Dimension: 67.5mm*30mm*20.5mm (without antenna) Antenna gain: 1.87dBi Note: The 24TX80 Antenna has change to 2.4GHz Moxon Antenna The new Slim Pro module supports a maximum power of 1000mw (requires the power of the remote control to drive), and comes with RGB LED lights, the effect is very cool. The default program has been updated to ExpressLRS V1.0.0. You can update firmware by ExpressLRS configurator or update the firmware via connect the Wifi hot spot of the “ExpressLRS TX Module”, visit “10.0.0.1” by browser (password: SKU : 3131/1381246985922101248/55