300Ml Loctite 510 Anaerobic Smooth Sealant Adhesive Flange Gear Plane

300Ml Loctite 510 Anaerobic Smooth Sealant Adhesive Flange Gear Plane Metal Sealing Glue High Temperature Oil Resistant Membeli berati setuju dengan peraturan PO Pree Order:) Baca Spesifikasi produk di deskripsi dengan lengkap:) Diy Supplies : Metalworking gin : Mainland China Model Number : 510-300Ml Type : Silicone Sealant Certification : None Loctite510_Loctite 510 Plane Sealing Anaerobic Agent_High Temperature Resistance Loctite Henkel Loctite 510 Glue, Loctite 510 Flat Sealing Anaerobic Glue, Excellent Fluid Resistance, High Temperature Resistance, Rigid Adhesive Layer, Used For Flange Parts With Tightly Matched Guillotine Structure, The Maximum Filling Gap Is 0.25Mm; The Maximum Working Temperature Range Is Up To 204 Degrees, With Excellent Solvent And Chemical Resistance. Typical Application: Anaerobic Plane Sealing, High Temperature Resistance Color: Pink Maximum Gap Filling: 0.254Mm Without Primer; 0.508Mm With Primer Cured State: Rigid Viscosity (Mpa.S): 200.000/750.000 Temperature Range: (-54) To 204 Recommended Accelerator: Loctite 7649 /7471 Relative Density: 1.1 Packing Specification: 300Ml Barrel Instructions 1. To Get The Best Results, It Is Recommended To Clean The Surface Of The Material To Be Bonded Without Grease. 2. This Product Is Suitable For Tightly Fitting Flange Parts With A Clearance Less Than 025Mm. 3. Paint The Product On One Surface Of The Flange By Hand Painting Or Screen Printing. 4. After Assembling And Before Curing, To Confirm Whether It Is Completely Sealed, It Can Be Tested By Applying A Certain Low Pressure ( lt;0.05Mpa) Method. 5. After Assembly, The Flange Should Be As Tight As Possible To Avoid Sliding. Precautions 1. If You Have Any Questions, Please Co