4.8/ 5.0
100% pembeli merasa puas
4 rating • 1 ulasan
5(3)75%
4(1)25%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp24.500
Servo Tester
Rp24.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Modul Elektronik
Product Specifications:
(1) Output: 15mA (5.0)
(2) Input: DC 4.2-6.0v
(3) output signal: 1.5ms 0.5ms
(4) Size: 46 * 32 * 17MM
(5) Weight: 8g
(6) adjustment: manual, automatic, and the median
characteristic: the ability to easily detect and set server's virtual spaces, jitter and median.
can be connected to two servos or ESC; MCU control, good stability high accuracy. Turn the knob, steering gear can be detected.
If you connect the electronic governor (brush or brushless may be), you can get rid of the remote control device for manual control, test tone for
speed or motor performance is very practical, no longer tedious connecting the remote control and the receiver. It is equivalent to a "hand
move receiver "function, the rotary knob analog transmitters rudder
Instructions: Refer to the picture below, then left steering gear, on points in the next three groups, which can be accessed three servos; the right of a single row of pins connected to the power supply, close to the edge of the negative electrode (to see identification symbol), then the battery anode, be careful not reversed, if the power reverse would burn IC; S identifiers corresponding pin, it does not matter. Power, blue light will light at the same time, and then only light left first, to manually adjust the potentiometer test, press the button, the middle light, for the return of the test; the third lights, automated testing. Test the connection and then transfer the same steering, but do not draw a line on the input of the power supply, the test motor must first take power transfer, with the same electric measurement tune!
(1) Output: 15mA (5.0)
(2) Input: DC 4.2-6.0v
(3) output signal: 1.5ms 0.5ms
(4) Size: 46 * 32 * 17MM
(5) Weight: 8g
(6) adjustment: manual, automatic, and the median
characteristic: the ability to easily detect and set server's virtual spaces, jitter and median.
can be connected to two servos or ESC; MCU control, good stability high accuracy. Turn the knob, steering gear can be detected.
If you connect the electronic governor (brush or brushless may be), you can get rid of the remote control device for manual control, test tone for
speed or motor performance is very practical, no longer tedious connecting the remote control and the receiver. It is equivalent to a "hand
move receiver "function, the rotary knob analog transmitters rudder
Instructions: Refer to the picture below, then left steering gear, on points in the next three groups, which can be accessed three servos; the right of a single row of pins connected to the power supply, close to the edge of the negative electrode (to see identification symbol), then the battery anode, be careful not reversed, if the power reverse would burn IC; S identifiers corresponding pin, it does not matter. Power, blue light will light at the same time, and then only light left first, to manually adjust the potentiometer test, press the button, the middle light, for the return of the test; the third lights, automated testing. Test the connection and then transfer the same steering, but do not draw a line on the input of the power supply, the test motor must first take power transfer, with the same electric measurement tune!
Ada masalah dengan produk ini?