Api Flare Deteksi Modul api Sensor 12V Relay Board Infrared

Api Flare Deteksi Modul api Sensor 12V Relay Board Infrared Selama Barang/Produk Masih Tayang/Aktif Berarti (Stok Tersedia), Bisa Langsung Di Order/Di Beli (Tidak Perlu Chat Toko). Masukkan Keranjang Lalu Bayar. Saat itu Juga Barang/Produk Langsung Kami Kirim. Semua Produk Di Toko Kami Pre Order 6 - 15 Hari Tergantung Stok dan Posisi Gudang Luar Negeri. Anda Order Berarti Anda Setuju Dengan Waktu Pre Order Yang Kami Tetapkan Secara Default 6 - 15 Hari. Usage:;Various flames, fire source detection, relay output, can be connected to 220V high current equipment;Features:;1. It can detect flame or light source with wavelenh in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.2. The detection angle is about 60 degrees, especially sensitive to the flame spectrum3. The sensitivity is adjustable (blue digital potentiometer adjustment in the figure)4. The comparator output directly triggers the relay5. The external dimensions: 50x26x19mm, with fixed bolt holes for easy installation6. The output has a blue terminal block, convenient wiring;Electrical parameters:;Supply voltage: 12VDCCurrent: greater than 150mALoad: 250V 10A AC or 30V 10A DC;Instructions for use:;1. The flame sensor is most sensitive to the flame and also responds to the sunlight. It is generally used for flame alarms and other purposes.2. By adjusting the potentiometer, the intensity of the sensors induced flame can be set. When the flame exceeds the set threshold, the relay is closed, the common end is connected to the normally open end, and when the flame is lower than the set threshold, the relay is disconnected. The common end is connected to the normally closed end;3. The common end, normally open, normally closed three ports are equivalent to a dual control switch, when the relay coil is powered, the common end is open to the normally open end, when there is no electricity, the SKU1367780