DC 6V Untuk 30V One Way Relay Modul Keterlambatan Power Off

DC 6V Untuk 30V One Way Relay Modul Keterlambatan Power Off Selama Barang/Produk Masih Tayang/Aktif Berarti (Stok Tersedia), Bisa Langsung Di Order/Di Beli (Tidak Perlu Chat Toko). Masukkan Keranjang Lalu Bayar. Saat itu Juga Barang/Produk Langsung Kami Kirim. Semua Produk Di Toko Kami Pre Order 6 - 15 Hari Tergantung Stok dan Posisi Gudang Luar Negeri. Anda Order Berarti Anda Setuju Dengan Waktu Pre Order Yang Kami Tetapkan Secara Default 6 - 15 Hari. Parameters:;Operating voltage: DC 6V-30V (supports micro USB 5V)Trigger signal source: high-level trigger (3V-24V) signal and systematically improve the systems anti-interference ability (also short-circuit altogether)Output capability: can control equipment that within DC 30V 5A or AC 220V 5AStatic current: 20mAWorking current: 50mAService life: more than 100,000 timesWorking temperature: -40C to 85CSize: 6.2*3.8*1.7cm (lenh*width*height);Relay enable mode:;1. ON: the relay is allowed to turn on during the OP conduction time;2. OFF: the relay is disabled and always closed.3. Short press the STOP button on the main interface to switch between ON and OFF. The current state will flash, and then return to the main interface. (this function is an emergency stop function, one-touch disconnected relay);Sleep mode:;1. C-P sleep mode: no operation within five minutes, the digital tube automatically shuts off the display and the program runs normally;2. O-d normal mode: the digital tube is always on display;3. Press and hold the STOP button for 2 seconds and release it to switch between the C-P and O-d states. The current state will flash, and then return to the main interface.;Operating mode:;P1: after the signal is triggered, the relay turns on the OP time and then turns off; during the OP time, the following operationP1.1: signal is invalid againP1.2: signal triggered againP1.3: the signal triggers a reset again, the relay opens, and the timer stops.;P2: for the trigger signal, SKU1311982