Holybro Kakute F7 HDV AIO & 4 * Tekko32 F3 Logam 65A ESC

Holybro Kakute F7 HDV AIO amp; 4 * Tekko32 F3 Logam 65A ESC Selama Barang/Produk Masih Tayang/Aktif Berarti (Stok Tersedia), Bisa Langsung Di Order/Di Beli (Tidak Perlu Chat Toko). Masukkan Keranjang Lalu Bayar. Saat itu Juga Barang/Produk Langsung Kami Kirim. Semua Produk Di Toko Kami Pre Order 6 - 15 Hari Tergantung Stok dan Posisi Gudang Luar Negeri. Anda Order Berarti Anda Setuju Dengan Waktu Pre Order Yang Kami Tetapkan Secara Default 6 - 15 Hari. Brand:;Holybro;Item Name: Holybro Kakute F7 HDV AIO ; 4* Tekko32 F3 Metal 65A ESC;Holybro Kakute F7 HDV AIO;Specification:OverviewHolybro Kakute F7 HDV All-In-One is designed to work with the DJI FPV VTx module. The GH port;available on the board makes it much more convenient for you to connect Holybro Kakute F7 HDV AIOto the DJI FPV VTx, for both signal and power supply.;Features:• Supports Betaflight.• High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.;• Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external;GPS/magnetometer units.• Dedicated bootloader button for easy firmware flashing.• Low-profile design fits into even very compact frames.• 2 oz. copper PCB allows up to 120A maximum continuous current.• Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad;only).• Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the;KAKUTE F7 HDV AIO monitors voltage directly from the power supply.• Filtered voltage output for clean, noise-free video. 2 On-board regulators output 5V and 8V. 5V;output up to 1.5A to power peripherals such as receiver, FPV camera, or LED strip. 8V output up;to 2A to DJI FPV VTx.• Supports BLHeli pass-through for easy ESC upgrade and configuration.;Specifications:• MCU: STM32F745 32-bit processor• IMU:MPU6000• Barometer: BMP280• USB SKU1594482