Loctite Pc 7218 Nordbak Wearing Compound Pc7218 41782,912251 Set Ori Best

LOCTITE PC 7218 adalah pelapis permukaan untuk logam melindungi abrasi atau erosi akibat partikel yang kasar, atau untuk menambal bagian yang aus. selain itu LOCTITE PC 7218 juga memiliki keunggulan lain diantaranya:
1. Melindungi logam dari abrasi partikel ukuran besar
2. Diaplikasikan dengan trowel
3. Cocok untuk aplikasi perbaikan akibat serangan bahan kimia
4. Memperbarui permukaan yang aus dengan cepat
Two-part epoxy
Ceramic filled for excellent abrasion and corrosion resistance
Non-sagging and can be trowelled
Applications
Suitable for protecting, rebuilding and repairing high wear areas of processing equipment, including chutes,elbows,cyclones and separator bodies
1 pails = 10Kg
Technical Information
Application method Trowel
Applications Protective Coating
Color Gray
Cure type Room Temperature (Ambient) Cure, Two Component Mix
Drying time 7.0 hr.
Key characteristics Abrasion Resistant, Prolongs Equipment Life, Renews Worn Surfaces, Sag: Non-Sag, Wear Resistant
Mix ratio, by volume 2 : 1
Particle size Large
Physical form Paste
Recommended for use with Metal
LOCTITE PC 7218 is a 2-part , ceramic filled , epoxy based protective coating designed to protect equipment from coarse particle
erosion and abrasion on metals and ceramic surfaces under dry service temperature of -28°C to 121°C.
» Alumina bead, Ceramic based
» CMR free
» Faster Curing
» Non sagging formulation
» Made in Australia
FEATURES BENEFITS
Reduce Costs Improve Safety
Can be used on a wide range of applications in most industries including Mining,
Power, Cement, Steel and others
» Chutes
» Hoppers
» Screens
» Launders
» Elbows
» Transition points
LOCTITE PC 7218
WEARING COMPOUND
Increase Efficiency Increase Reliability
» Outstanding resistance to coarse particle abrasion
» Sustainable solution and safe to use
» Reduce downtime
» Can be applied to vertical and overhead surfaces
» Locally made for easy availability
BARANG YANG SUDAH DI BELI TIDAK DAPAT DI TUKAR KEMBALI !!