POE SWITCH Network Extender 2 port - POE INJECTOR 2 Port UP 100 meter

Features

Comply with IEEE 802.af Power over Ethernet (10/100M Supported)

Extender the range of PoE an additional 100 meters

Automatically detects and protects PoE equipment from being damaged by incorrect installation

Plug-and Play no configuration required

2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.

2-Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other two for power output. Comply with 10/100BASE-TX,IEEE 802.3 af-PoE.

Power input for one port is 13W. Power output for four port is 12.2W.

Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far away from the power outlets

Installed at hotels, schools, buildings, villages, etc.

Specification

POE input: 1 RJ45 port (DC 44-57V, 802.3at)

POE output: 2 RJ45 port (48V, 802.3af)

POE Pin Output: 1/2(+), 3/6(-)； MAX Power 15W

Network Medium: Cat5 or better UTP cables (less than 120m)

Repeater Mode: Store and forward

MAC Address Table: 2K

Packet Buffer Memory: 48 Byte

Switching Capacity: 1.0Gbps

PoE Standard: IEEE 802.3af

Input power: 13 Watts

Output power: 12.2 Watts

Power Supply Type: 1/2+,3/6-,Mode A, End-Span

Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;

Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;

Working temperature: -10°c to 45°c

Working Humidity: 5%~90%, No Condensation;

Dimension: 44x88x22mm / 2.95'' x 3.46'' x 0.86''