50Ml Loctite 277 Thread Locking Ant Anaerobic Adhesive

50Ml Loctite 277 Thread Locking Ant Anaerobic Adhesive Sss
Kami Menyediakan Barang Yang Anda Butuhkan
- Item Tersedia
- Buka 24 Jam, Kec Admin Lagi Ketiduran
- Hub Kami Untuk Menanyakan Varian Barang
- Pengiriman Pat 6-15 Hari Sai
Rtification : None
Origin : Cn(Origin)
Diy Supplies : Metalworking
Type : Silicone Sealant
Iscustomized : Yes
Model Number : 277
Specification : 50Ml
Color : Red
Type : High Strength, Chemical Resistan Performan
Relative Density : 1.1
Name: 277
Specification: 50Ml
Color: Red
Type: High Strength, Chemical Resistan Performan
Viscosity: 6000/8000Mpa.S
Avera Impedan: 32N.M
Avera Dama Factor: 32N.M
Temperature Ran: -54/150?
Speed: 12 Hours
Recommended Acrator: 7649/7471
Relative Density: 1.1
It Can Be Used To Lock The Cylinder Head Doub-Threaded Thread. It Can Be Quickly Cured, Including Prying Without Special Surfa Treatment. It Is Recommended To Produ Bolts With A Diameter Below 1.5" (36Mm). Heating And Tools Are Required For Disassembly.
Instructions
Pretreatment: Can The Surfa Of The Assembly To Ensure That There Is No Residual Oil Stains, Such As Engine Oil, Anti-Rust Oil, Etc., And Most Surfas Have No Special Pretreatment. For Difficult-To-Bond Substrates, Cooperation Must Be Promoted
Ant Pretreatment.
Sizing: Take An Appropriate Amount Of This Product And Apply It Evenly On The Surfa Of The Thread.
Glue Removal: The Spild Glue Will Not Solidify, Just Wipe It Off.
Disassembly Method
1. Disassemb With Standard Hand Tools.
2. In Rare Cases, The Bolts Cannot Be Disassembd At Room Temperature Due To The Long Mating Ngth. The Bolts Can Be Heated Locally To 250�C And Disassembd Whi It Is Hot.
3. Partially Heat The
Ssshm109566