Atur jumlah dan catatan
Stok Total: 500
Subtotal
Rp251.467
M8/M10 Milling Engraving Machine Parts Pressure Plate Clamp Fixture Plate for T-slot Working Table
Rp251.467
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Origin : Mainland China
Hign-concerned Chemical : none
Features:
brand new and high quality.
Product Name: Engraving Machine Fixed Platen M8/M10
Color: black
Material: 45 # steel
Surface Treatment: black oxide
T8 screw M8 screw head size 18mm long, 14mm wide, 5mm thick
T10 screw M10 head size 23mm long, 17.6mm wide, 6.5mm thick
(The pressure plates are all M10) Please note (there is no M8 pressure plate)
Application: fasteners for machinery industry
Note:
Some customers previously reported that our screws were too small and measured with a tape measure to be 6mm (there is an error in the tape measure).
If measured with a caliper, it is 7mm (the caliper has an error, the standard measurement here is 7.67mm)
I actually dont have M6 and M7 T-type screws here.
You can also judge the size of the screw by measuring the head size.
Or measure the opposite side of the nut. The opposite side of the M8 nut is about 14mm.
Use a No. 14 wrench. If the nut is matched, it can prove that the screw is M8.
Package Includes:
1 set Pressure Plate Clamp
Hign-concerned Chemical : none
Features:
brand new and high quality.
Product Name: Engraving Machine Fixed Platen M8/M10
Color: black
Material: 45 # steel
Surface Treatment: black oxide
T8 screw M8 screw head size 18mm long, 14mm wide, 5mm thick
T10 screw M10 head size 23mm long, 17.6mm wide, 6.5mm thick
(The pressure plates are all M10) Please note (there is no M8 pressure plate)
Application: fasteners for machinery industry
Note:
Some customers previously reported that our screws were too small and measured with a tape measure to be 6mm (there is an error in the tape measure).
If measured with a caliper, it is 7mm (the caliper has an error, the standard measurement here is 7.67mm)
I actually dont have M6 and M7 T-type screws here.
You can also judge the size of the screw by measuring the head size.
Or measure the opposite side of the nut. The opposite side of the M8 nut is about 14mm.
Use a No. 14 wrench. If the nut is matched, it can prove that the screw is M8.
Package Includes:
1 set Pressure Plate Clamp
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan