Noise jam Source Simple Spectrum External Generator Tracking SMA Source tracking Signal Generator+case DC 12V 0.3A

Brand Name : HKFZ
Origin : Mainland China
DIY Supplies : ELECTRICAL


Shipment is not assembled

Test equipment: Agilent DSA815 spectrum analyzer (9KHz-1.5GHz); Power supply: 12V1A;

Power interface, single pin and random delivery without pin, the function is the same as the DC port, it does not affect the use.If you need one, you can leave a message.
Noise source Noise source Simple spectrum tracking source,
noise source
Power supply: DC12V / 0.3A-1A
POWER: DC12V / 0.3-1A
Output interface: SMA
OUTPUT CONNECT: SMA
Reference ENR (Super Noise Ratio): 0.1G / 60DB 0.5G / 55DB, 1G / 52DB,
1.5G / 48DB 2G / 38DB 2.5G / 30DB, 3G / 27DB, 3.5G / 20DB,
reference ENR:0.1G / 60DB 0.5G / 55DB, 1G / 52DB,

1.5G / 48DB 2G / 38DB 2.5G / 30DB, 3G / 27DB, 3.5G / 20DB,
Q: What is this and is it useful?
Q: what is this?what used?
A: Noise source, which generates noise, can be used as spectrum tracking source, interference source
A: noise source, generator noise, used tracking generator, jam source

Q: What is the basic principle and how to use it?
Q: what is the basic to used?
A: A special voltage regulator is used to generate white noise in the breakdown state and then amplify it.Simply replace the tracking source
A: used special voltage regulator tube, generator white noise and then amplifiler.
directly replace tracking generator.

Q: What is ENR
Q: what is ENR?
A: Super noise ratio ENR, full name in English is Excess Noise Ratio, which means that the noise source exceeds the standard noise temperature T0 multiple of thermal noise.
Here we mean that the signal strength is poor after the spectrum is not connected to the noise source and the noise source is connected.
A: ENR (Excess Noise Ratio), noise sources over standard noise temperature T0 thermal noise.
here refers to the difference of no input noise source and input noise soucrce signal level.