4.5/ 5.0
100% pembeli merasa puas
2 rating • 2 ulasan
5(1)50%
4(1)50%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 11
Subtotal
Rp290.000
Jumper R1 Frsky D16 SPort and Sbus 16CH Micro Telemetry RX Receiver
Rp290.000
Pilih warna: 2 warna
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Remot Control
The Jumper R1 D16 receiver is compatible with all devices capable of using FrSky D16 mode.
Ideal for mini-drones or models requiring an S.bus or S.port connection.
Specifications
Size: 20*15*4mm (without antenna)
Weight: <2g
Channels: 16ch (SBUS)
RSSI (Signal Strength Indication) output: 0-3.3v
Data return: S.port
Operating voltage range: 4.0~6V
Operating current range: 80mA@5V
Effective distance: full distance (>1.5km)
Compatibility: FrSky D16 Mode
Binding method
Press and hold the receiver's bind button, turn on the power, the receiver will now enter binding mode. The red light is always on and the green light is flashing slowly.
Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.
Note: When the receiver loses the signal, the green light is off and the red light is flashing slowly.
Item: Jumper R1 V2 Mini 2.4GHz 16CH Receiver
Parameters:
Brand Name: Jumper
Item Name: R1 V2 Mini RC Receiver
Model: R1 V2 Mini
Dimension: 17.2*8.8*4.5mm (L x W x H)
Weight: 1.5g
Number of Channels: 16Ch
Operating Voltage Range: 3.5V-6V
Operating Current: 60mA@5V
Operating Range: Full range
Distance: >2KM
Compatibility: radios in D16 mode
Features:
Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module . A transmitter internal or external RF module can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure.
- Put the transmitter/transmitter RF module into binding mode
- Connect battery to the receiver while holding the F/S button (hold for more than 6 seconds) on the receiver to enter the binding mode (red and green LEDs constant on). Press "bind" on the transmitter, the RED LED flashing indicates binding successfully. Reboot the receiver and go back to normal Mode of transmitter RF. Green LED constant on indicates
Ideal for mini-drones or models requiring an S.bus or S.port connection.
Specifications
Size: 20*15*4mm (without antenna)
Weight: <2g
Channels: 16ch (SBUS)
RSSI (Signal Strength Indication) output: 0-3.3v
Data return: S.port
Operating voltage range: 4.0~6V
Operating current range: 80mA@5V
Effective distance: full distance (>1.5km)
Compatibility: FrSky D16 Mode
Binding method
Press and hold the receiver's bind button, turn on the power, the receiver will now enter binding mode. The red light is always on and the green light is flashing slowly.
Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.
Note: When the receiver loses the signal, the green light is off and the red light is flashing slowly.
Item: Jumper R1 V2 Mini 2.4GHz 16CH Receiver
Parameters:
Brand Name: Jumper
Item Name: R1 V2 Mini RC Receiver
Model: R1 V2 Mini
Dimension: 17.2*8.8*4.5mm (L x W x H)
Weight: 1.5g
Number of Channels: 16Ch
Operating Voltage Range: 3.5V-6V
Operating Current: 60mA@5V
Operating Range: Full range
Distance: >2KM
Compatibility: radios in D16 mode
Features:
Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module . A transmitter internal or external RF module can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure.
- Put the transmitter/transmitter RF module into binding mode
- Connect battery to the receiver while holding the F/S button (hold for more than 6 seconds) on the receiver to enter the binding mode (red and green LEDs constant on). Press "bind" on the transmitter, the RED LED flashing indicates binding successfully. Reboot the receiver and go back to normal Mode of transmitter RF. Green LED constant on indicates
Ada masalah dengan produk ini?