Atur jumlah dan catatan
Stok: Sisa 1
Subtotal
Rp99.999.999
Kompressor Selam Coltri Force Four Komba HP C450 ET Heavy-Duty (Auto) - Tahap 1
Rp99.999.999
Pilih pembayaran: Tahap 1
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: COMPRESSOR
NOTE : Kami merekomendasikan Pembelian kompressor menggunakan packing kayu ...
https://www.tokopedia.com/oceanking/tambahan-extra-packing-kayu-tabung-compressor-c906b
Untuk pembelian kompressor secara Online / Offline bisa chat admin untuk informasi lebih lanjut.
Model FORCE FOUR memenuhi kebutuhan profesional yang memerlukan kapasitas pengisian daya yang besar di lingkungan yang panas dan berventilasi buruk atau negara tropis. Dilengkapi dengan panel kontrol intuitif dan motor listrik. Unit pemompaan, yang terdiri dari 3 unit paling bertenaga, diekspos untuk memastikan siklus pendinginan yang lebih baik. Dilengkapi dengan sistem pemurnian Hyperfilter yang dipasang pada sistem yang berdiri sendiri, dengan drainase kondensat otomatis. Untuk masa pakai filter yang lebih lama, pengering tekanan tinggi Tornado direkomendasikan. Tersedia sebagai opsi: sistem Presec untuk kontrol saturasi filter, kartrid filter berukuran besar Megafilter, dan panel isi ulang jarak jauh 2 atau 4 outlet.
4-stage high pressure pumping unit.
- Monobloc in aluminum
- Crankshaft in forged steel
- Forced lubrication on the 4th stage cylinder by gear pump
- Oil filtration
- Aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- 1st, 2nd and 3rd stage cylinders in special cast iron
- 4th stage cylinder in special treated steel.
- Low oil pressure switch.
- Stainless steel intake and exhaust valves
- Interstage cooling pipes in stainless steel
- Separator after the 2nd, 3rd and 4th stage
- Safety valves after each stage
- Oil level sensor
- Prepared for Hyperfilter filter system
Electric motor
One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. Single-phase 7.5 kW or three-phase 7.5 to 11 kW electric motor is available on this model.
Purification at the highest level.
Placed after the last compressor separator and before the pressure holding valve, the Hyperfilter purification system enables reliable treatment of the breathing air according to DIN EN 12021¹ when using original filter cartridges. The separator present between the 2nd and 3rd stage of the purification circuit allows to extract the greatest possible humidity. The filtering capacity with inlet air at 20 ° C and 200 bar is 4300 m³.
Compressor control and automatic condensate drainage system
- Motor protection switch.
- Fixed calibration pressure switch 232 or 300 bar.
- Autostart with pressure differential 15 bar. (optional)
- Transformer.
- Drainage of all separators between individual stages and also of the final separator during compressor operation (standard drainage interval every 15 minutes for a period of 6 seconds).
- Timer for automatic condensate drain.
- Interstage pressure gauges display the working pressure for the individual compression stages. This pressure information allows you to check the tightness of the valves (inlet and outlet) of each stage and to quickly identify potential sources of failure.
Interstage pressure gauges are mounted in the compressor frame.
Standard equipment
- 4 Filling connections of your choice of DIN 232, DIN 300 or INT/YOKE 232 bar
- 4 filling hoses of 1.2 m in length
- Pressure maintenance valve
- Interstage control gauges
- Double PED certified Hyperfilter filter system
- Purification system on “stand-alone” structure
- Automatic condensate drain
- Oil level control with automatic shutdown
- Oil pump
- Frame color Black RAL 9005
Technical data
-Type of gas :Breathing air (EN 12021) – Nitrox 40% max O2 – Helium – Nitrogen
- Intake pressure : Atmospheric max 300 millibars
- Nominal pressure : 250 bar / 330 bar / 360 bar
- Working pressure : 250 bar / 330 bar / 360 bar
- Max working pressure : 420 bar
- Oil : Synthetic Coltri Oil ST 755
- Frame : Steel thickness 1.5 mm – Color RAL Black 9005 – Powder coating – scratch-resistant
Charging rate : 450 l/min / 27 m3/h / 15.9 CFM
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
Purification system : 2 Hyperfilter su struttura stand-alone
Weight : 250 kg / 551 lb
Standard model. Weight and dimensions may vary depending on accessories.
Dimensions : 115 x 60 x 79.6 cm / 45.3 (W) x 23.6 (D) x 31.3 in (H)
Power : 7.5 kW / 10 Hp
Type : Three phase Electric
https://www.tokopedia.com/oceanking/tambahan-extra-packing-kayu-tabung-compressor-c906b
Untuk pembelian kompressor secara Online / Offline bisa chat admin untuk informasi lebih lanjut.
Model FORCE FOUR memenuhi kebutuhan profesional yang memerlukan kapasitas pengisian daya yang besar di lingkungan yang panas dan berventilasi buruk atau negara tropis. Dilengkapi dengan panel kontrol intuitif dan motor listrik. Unit pemompaan, yang terdiri dari 3 unit paling bertenaga, diekspos untuk memastikan siklus pendinginan yang lebih baik. Dilengkapi dengan sistem pemurnian Hyperfilter yang dipasang pada sistem yang berdiri sendiri, dengan drainase kondensat otomatis. Untuk masa pakai filter yang lebih lama, pengering tekanan tinggi Tornado direkomendasikan. Tersedia sebagai opsi: sistem Presec untuk kontrol saturasi filter, kartrid filter berukuran besar Megafilter, dan panel isi ulang jarak jauh 2 atau 4 outlet.
4-stage high pressure pumping unit.
- Monobloc in aluminum
- Crankshaft in forged steel
- Forced lubrication on the 4th stage cylinder by gear pump
- Oil filtration
- Aluminum connecting rods
- Main roller bearings
- Roller connecting rod bearings
- 1st, 2nd and 3rd stage cylinders in special cast iron
- 4th stage cylinder in special treated steel.
- Low oil pressure switch.
- Stainless steel intake and exhaust valves
- Interstage cooling pipes in stainless steel
- Separator after the 2nd, 3rd and 4th stage
- Safety valves after each stage
- Oil level sensor
- Prepared for Hyperfilter filter system
Electric motor
One of the fundamental parts of the compressor: the motor transfers the motion to the pumping unit through the belt. Single-phase 7.5 kW or three-phase 7.5 to 11 kW electric motor is available on this model.
Purification at the highest level.
Placed after the last compressor separator and before the pressure holding valve, the Hyperfilter purification system enables reliable treatment of the breathing air according to DIN EN 12021¹ when using original filter cartridges. The separator present between the 2nd and 3rd stage of the purification circuit allows to extract the greatest possible humidity. The filtering capacity with inlet air at 20 ° C and 200 bar is 4300 m³.
Compressor control and automatic condensate drainage system
- Motor protection switch.
- Fixed calibration pressure switch 232 or 300 bar.
- Autostart with pressure differential 15 bar. (optional)
- Transformer.
- Drainage of all separators between individual stages and also of the final separator during compressor operation (standard drainage interval every 15 minutes for a period of 6 seconds).
- Timer for automatic condensate drain.
- Interstage pressure gauges display the working pressure for the individual compression stages. This pressure information allows you to check the tightness of the valves (inlet and outlet) of each stage and to quickly identify potential sources of failure.
Interstage pressure gauges are mounted in the compressor frame.
Standard equipment
- 4 Filling connections of your choice of DIN 232, DIN 300 or INT/YOKE 232 bar
- 4 filling hoses of 1.2 m in length
- Pressure maintenance valve
- Interstage control gauges
- Double PED certified Hyperfilter filter system
- Purification system on “stand-alone” structure
- Automatic condensate drain
- Oil level control with automatic shutdown
- Oil pump
- Frame color Black RAL 9005
Technical data
-Type of gas :Breathing air (EN 12021) – Nitrox 40% max O2 – Helium – Nitrogen
- Intake pressure : Atmospheric max 300 millibars
- Nominal pressure : 250 bar / 330 bar / 360 bar
- Working pressure : 250 bar / 330 bar / 360 bar
- Max working pressure : 420 bar
- Oil : Synthetic Coltri Oil ST 755
- Frame : Steel thickness 1.5 mm – Color RAL Black 9005 – Powder coating – scratch-resistant
Charging rate : 450 l/min / 27 m3/h / 15.9 CFM
Measured during 10 liters cylinder filling from 0-200 bar tolerance +/- 5% at + 20° C ambient temperature.
Purification system : 2 Hyperfilter su struttura stand-alone
Weight : 250 kg / 551 lb
Standard model. Weight and dimensions may vary depending on accessories.
Dimensions : 115 x 60 x 79.6 cm / 45.3 (W) x 23.6 (D) x 31.3 in (H)
Power : 7.5 kW / 10 Hp
Type : Three phase Electric
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan