Roland Wax Model Milling Machine JWX-30

Cuttable material Modeling wax X,Y,and Z operation strokes X, Y, and Z: 305 x 205 x 100 mm (12 x 8.1 x 3.9 in.) Connectivity USB (compliant with Universal Serial Bus Specification Revision 1.1) Power requirements Voltage and frequency AC 100 to 120 V/220 to 240 V 10%, 50/60 Hz (overvoltage category II, IEC 60664-1) Required power capacity 2.8 A (100 to 120 V)/1.2 A (220 to 240 V) Power consumption 275 W Dimensions Width x depth x height: 606 x 656 x 557 mm (23.9 x 25.9 x 22 in.) Weight 47 kg (104 lb) Environment Operating environment: Temperature of 5 to 40C (41 to 104 F), 35 to 80% relative humidity (no condensation) Ambient pollution degree: 3 (as specified by IEC 60664-1) Accessories Power cord, Handy panel, Tools for modeling (ball end mill, diameter 3.175mm /conical end mill, diameter 3.175 mm), collet (diameter 3.175 mm), detection pin, hexagonal screwdriver, hexagonal wrench, cap screws (10), spanner (10 mm, 17mm), modeling wax, clamp holder, square clamp (large), square clamp (small), swivel clamp, tube clamp, dust tray, blower fan, Users Manual, SRP Player Installation and Setup Guide, SRP Player CD-ROM, Roland Software Package CD-ROM, Roland JewelStudio DVD-ROM System Requirements Computer/OS Windows 7* (32/64-bit); Windows Vista (32/64-bit); Windows XP Home Edition/Professional (32/64-bit) *Rhinoceros 4.0 Service Release 7 or later run on. CPU Processor that operating system run on (Pentium 4, 2.4 GHz or faster recommended) RAM 1 GB RAM (3 GB or more recommended) Optional drive DVD Drive Free hard-disk space 500 MB (1 GB or more recommended) Other At least 16-bit color (High Color) and a resolution of 1,024 x 768 or more (video card compatible with OpenGL) IntelliMouse recommended USB cable Use a shielded cable up to three meters (10 ft.) in length Options Item Model number Description Finishing cutter ZEC-J3015 Cemented car