5.0/ 5.0
100% pembeli merasa puas
2 rating • 1 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp479.000
NOBUNAGA LABS Custom Silver-plated 2pin Connector Set Made in Japan
Rp479.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: NOBUNAGA LABS
PRE-ORDER! Silakan hubungi kami untuk estimasi pengiriman.
100% PRODUK BARU & ORIGINAL
===
Features:
● The connector and shell are screw-type and can be fixed without using adhesive.
● By applying special processing to the connector part after gold plating, it prevents the generation of oxidizing substances, maintains a clean metal surface, and maintains the solder wettability of the contact part. Work efficiency is improved by using PEEK resin, which has a high heat-resistant temperature, as the resin between electrodes. Furthermore, in order to secure a space for fixing the connection part, the screw part is shortened.
● Slit design is applied to the outside of the shell, and black and red left and right identification lines are printed. The line is printed on the groove so that it will not disappear even after long-term use. (Left, black, right, and red are common)
Spec:
Material
PIN : BRASS WITH SILVER PLATED
SHELL : ALUMINUM WITH CLEAR ANODIC TREATMENT
Size ：~3.0mm
※Recommend soldering temperature:
Temperature Soldering Iron, please keep 300 degree within 10 second
Temperature Soldering Iron, please keep 350 degree within 10 second
Temperature Soldering Iron, please keep 400 degree within 5 second
100% PRODUK BARU & ORIGINAL
===
Features:
● The connector and shell are screw-type and can be fixed without using adhesive.
● By applying special processing to the connector part after gold plating, it prevents the generation of oxidizing substances, maintains a clean metal surface, and maintains the solder wettability of the contact part. Work efficiency is improved by using PEEK resin, which has a high heat-resistant temperature, as the resin between electrodes. Furthermore, in order to secure a space for fixing the connection part, the screw part is shortened.
● Slit design is applied to the outside of the shell, and black and red left and right identification lines are printed. The line is printed on the groove so that it will not disappear even after long-term use. (Left, black, right, and red are common)
Spec:
Material
PIN : BRASS WITH SILVER PLATED
SHELL : ALUMINUM WITH CLEAR ANODIC TREATMENT
Size ：~3.0mm
※Recommend soldering temperature:
Temperature Soldering Iron, please keep 300 degree within 10 second
Temperature Soldering Iron, please keep 350 degree within 10 second
Temperature Soldering Iron, please keep 400 degree within 5 second
Ada masalah dengan produk ini?