5.0/ 5.0
100% pembeli merasa puas
19 rating • 5 ulasan
5(19)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 177
Subtotal
Rp238.000
Water Flow Sensor 2 Inchi DN50 Sensor Debit Air Sea Brand
Rp238.000
Water flow sensor 2 inchi inch 2" DN50 Sensor Debit Air Sea Brand
Description:
Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.
Material : Plastic
Specification :
Function : Sensor , flow rate control
Thread size : Male DN50
Size:L 92x OD58 X2"
Color : BlacK color
Flow rate : 10~350L/min
Flow Pulse: F(Hz)=(0.2xQ) -3% Q=L/min
Max. Working Current : 15mA (DC5 V)
Min. Working Voltage: DC 4.5V
Working Voltage:DC 5V~24V
Load Capacity: =10 mA (DC 5 V)
Operating Working Temperature : -25 Degree centigrade to +80 Degree centigrade
Liquid Temperature: 80 Deg C
Accuracy : 5%
1L water = 12Pulse
Working environmental : water , liquid, light oil, Drinking water.
Material : RoHs, no-toxic
Note:
1. When magnetic material is close with the sensor, its characteristics may vary.
2. In order to avoid particle debris, the sensor must be installed after a filter.
3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.
Features:
1. Food grade POM (polyformaldehyde) material, environmental friendly material, small, flexible and functional.
2. Intubation design of inlet and outlet pipe, easy connection and operation;
3. Imported Hall IC from Japan, stable and reliable;
4. Range: 10-200L/min;
5. working voltage: DC4.5-12V;
6. rated voltage: DC5V;
7. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below
8. Pulse output duty cycle: 50+-10%
9. Insulation resistance: 100M Ohm and above;
10. Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;
11. -20-80 centigrade;
12. Hydrostatic pressure: <= 1.75MPa meet
Description:
Function: For the sense of the water flow rate on the following equipments: Thermostatic water heater, water purifier, water dispenser, smart card equipment, coffee machine etc.
Material : Plastic
Specification :
Function : Sensor , flow rate control
Thread size : Male DN50
Size:L 92x OD58 X2"
Color : BlacK color
Flow rate : 10~350L/min
Flow Pulse: F(Hz)=(0.2xQ) -3% Q=L/min
Max. Working Current : 15mA (DC5 V)
Min. Working Voltage: DC 4.5V
Working Voltage:DC 5V~24V
Load Capacity: =10 mA (DC 5 V)
Operating Working Temperature : -25 Degree centigrade to +80 Degree centigrade
Liquid Temperature: 80 Deg C
Accuracy : 5%
1L water = 12Pulse
Working environmental : water , liquid, light oil, Drinking water.
Material : RoHs, no-toxic
Note:
1. When magnetic material is close with the sensor, its characteristics may vary.
2. In order to avoid particle debris, the sensor must be installed after a filter.
3. The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor's measurement accuracy.
Features:
1. Food grade POM (polyformaldehyde) material, environmental friendly material, small, flexible and functional.
2. Intubation design of inlet and outlet pipe, easy connection and operation;
3. Imported Hall IC from Japan, stable and reliable;
4. Range: 10-200L/min;
5. working voltage: DC4.5-12V;
6. rated voltage: DC5V;
7. Output voltage(rated: DC 5V); High level 4.5V and above; low level 0.5V and below
8. Pulse output duty cycle: 50+-10%
9. Insulation resistance: 100M Ohm and above;
10. Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;
11. -20-80 centigrade;
12. Hydrostatic pressure: <= 1.75MPa meet
Ada masalah dengan produk ini?