5.0/ 5.0
100% pembeli merasa puas
10 rating • 4 ulasan
5(10)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 9
Subtotal
Rp99.000
Kabel SATA 2 Way Splitter | SATA Y-Cable | ZimaBoard | 2 HDDs / SSDs
Rp99.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: ZimaBoard ZimaBlade dan Aksesoris
SATA 2 Way Splitter Cable
Untuk menghubungkan 2 buah SATA SSD/HDD hanya dari 1 port power pada ZimaBoard. Sedangkan kabel SATA yang disertakan dalam pembelian unit ZimaBoard hanya dapat menghubungkan 1 buah SATA SSD/HDD.
**lebih hemat jika dipesan bersama unit ZimaBoard.
INTRODUCTION
Ready to dock!
We designed the layout of ZimaBoard to be highly compact. Both the compactness of the interface and convenience are concerned. The overall design needs to be light and thin enough to minimize the space occupation of the whole machine and have a certain degree of expansion and expansion. The rear interface still maintains the alignment of the external interface. The design team tried no less than ten different layout methods and finally locked all the existing functional interfaces and layout methods. Among them, the power supply of SATA 3.0 peripherals, only retaining a 4-pin power interface, is a compromise in space.
Michael Waiblinger(backer) put forward the idea of Y-Cable in February through a Y-shaped cable customized to the wire factory to streamline the need for a ZimaBoard to tow 2 HDDs or 2 SSDs. We quickly implemented this idea, found a wire manufacturer, customized a pure black SATA Y-Cable, and optimized the motherboard circuit so that the board's current can support the power consumption of at least two 2.5-inch HDDs. Meet the needs of building an entry-level RAID using FreeNAS and UNRAID.
**
Note: After a long period of rigorous testing and verification by community users, we confirmed that this Y cable can perfectly support two 3.5-inch HDD drives to work at the same time with the 12V/3A power supply for ZimaBoard.
**
SPECIFICATION
Brand: ZimaBoard
Designer: Michael Waiblinger
Cable Length: 10cm (3.9 inch)
Connector: Dual 22p SATA Connector
Untuk menghubungkan 2 buah SATA SSD/HDD hanya dari 1 port power pada ZimaBoard. Sedangkan kabel SATA yang disertakan dalam pembelian unit ZimaBoard hanya dapat menghubungkan 1 buah SATA SSD/HDD.
**lebih hemat jika dipesan bersama unit ZimaBoard.
INTRODUCTION
Ready to dock!
We designed the layout of ZimaBoard to be highly compact. Both the compactness of the interface and convenience are concerned. The overall design needs to be light and thin enough to minimize the space occupation of the whole machine and have a certain degree of expansion and expansion. The rear interface still maintains the alignment of the external interface. The design team tried no less than ten different layout methods and finally locked all the existing functional interfaces and layout methods. Among them, the power supply of SATA 3.0 peripherals, only retaining a 4-pin power interface, is a compromise in space.
Michael Waiblinger(backer) put forward the idea of Y-Cable in February through a Y-shaped cable customized to the wire factory to streamline the need for a ZimaBoard to tow 2 HDDs or 2 SSDs. We quickly implemented this idea, found a wire manufacturer, customized a pure black SATA Y-Cable, and optimized the motherboard circuit so that the board's current can support the power consumption of at least two 2.5-inch HDDs. Meet the needs of building an entry-level RAID using FreeNAS and UNRAID.
**
Note: After a long period of rigorous testing and verification by community users, we confirmed that this Y cable can perfectly support two 3.5-inch HDD drives to work at the same time with the 12V/3A power supply for ZimaBoard.
**
SPECIFICATION
Brand: ZimaBoard
Designer: Michael Waiblinger
Cable Length: 10cm (3.9 inch)
Connector: Dual 22p SATA Connector
Ada masalah dengan produk ini?