4.9/ 5.0
94% pembeli merasa puas
35 rating • 8 ulasan
5(33)94.29%
4(0)0%
3(1)2.86%
2(1)2.86%
1(0)0%
Atur jumlah dan catatan
Stok Total: 795
Subtotal
Rp122.750
Permatex Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker
Rp122.750
Permatex Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker
OEM specified. For dealership warranty requirements, Ultra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65F to 500F (-54C to 260C) intermittent; resists auto and shop fluids and vibration.
Automobile
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers
Marine
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" bead.
3. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary.
4. Silicone dries in 1 hour, and fully cures in 24 hours, at 70F - 50% relative humidity. Allow more time in cold weather.
5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner. Clean tools with non-flammable cleaning fluid.
Net : 85 gram
Made in USA
OEM specified. For dealership warranty requirements, Ultra Black ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor-safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistant properties through use of a patented adhesion system. Temperature range -65F to 500F (-54C to 260C) intermittent; resists auto and shop fluids and vibration.
Automobile
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, differential covers
Marine
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size gaskets are best formed using a 1/16" to 1/4" bead.
3. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary.
4. Silicone dries in 1 hour, and fully cures in 24 hours, at 70F - 50% relative humidity. Allow more time in cold weather.
5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner. Clean tools with non-flammable cleaning fluid.
Net : 85 gram
Made in USA
Ada masalah dengan produk ini?