Xeno Mod Direct-reading Chip For Gamecube NGC SD2SP2 PRO Adapter TF Card Reader for NTSC-J/NTSC/PAL CD Console Modification Part

Xeno Mod Direct-reading Chip For Gamecube NGC SD2SP2 PRO Adapter TF Card Reader for NTSC-J/NTSC/PAL CD Console Modification Part

Deskripsi :

Accessories Type : SD/TF Card Adapter
With USB : No
is_customized : YES
Model Number : NGC SD2SP2 PRO Adapter
Compatible Brand/Model : Nintendo
Brand Name : ALLOYSEED
Origin : Mainland China
Feature 1 : SD2SP2 PRO+CD PAL Adapter
Feature 2 : SD2SP2 PRO+CD NTSC-J Adapter
Feature3 : SD2SP2 PRO+CD NTSC-U Adapter
Feature 4 : XENO+SD2SP2 PRO+CD PAL Adapter
Feature 5 : XENO+SD2SP2 PRO+CD NTSC-J
Feature 6 : XENO+SD2SP2 PRO+CD NTSC-U
Feature 7 : V 0.6 CD boot disk
NTSC-U : US version machine use
NTSC-J : Subversion machine use
PAL : European version machine use


For Gamecube NGC SD2SP2 PRO Adapter Replacement Parts Accessories Card Adapter Practical for SD Load SDL Micro SD Card TF Card

Feature:

1. XENO Chips:
Xenogc is the driver chip fit for Nintendo gamecube. It installs directly onto the optical drive logic board and injects patch code into the drive at runtime. This allows dvd +/-r/rw media read and debug commands to be executed. You can start all imported games, game backups, or multiple original and backup copies of games (using the version we sell). Direct boot from dvd +-rw media Compatible with all regions and all versions.

2. SD2SP2 PRO Adapter:
Use an SD memory card on for your GameCube (GC) and run custom homebrew or use this SD to serial port adapter. This adapter bypasses the limitations of the GameCube memory card adapter, allowing the use of memory cards larger than 2GB. The maximum capacity of memory cards that can be used depends on the software used, currently Switzerland is up to 512GB, but please note that only some memory cards are compatible with Switzerland and you should check online to make sure your memory card can be used with.

3. Application:
Serial port SD memory card adapter for running homebrew on GameCube consoles.

4. Installation Location:
Mounts under the console behind the cover labeled Serial Port 2.

5. Satisfaction Guarantee:
We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly.

Specification:

1. Style A: SD2SP2 PRO+CD PAL

2. Style B: SD2SP2 PRO+CD NTSC-J

3. Style C: SD2SP2 PRO+CD NTSC-U

4. Style D: XENO+SD2SP2 PRO+CD PAL

5. Style E: XENO+SD2SP2 PRO+CD NTSC-J

6. Style F: XENO+SD2SP2 PRO+CD NTSC-U

Product size: about 30*20*10mm/1.18*0.79*0.39inch

V 0.6 CD boot disk :

NTSC-U: US version machine use

NTSC-J: Subversion machine use

PAL: European version machine use

Mode Settings:

1. Disable Audio Repair - Press the left shoulder button while loading the disc.

2. Disable dre fix - Press the right shoulder button during disc loading.

3. Force NTSC display mode - press the x button during disk loading.

4. Pal Intensity Display Mode - Press the y key while charging the disc.

5. Xenogc shell (multi-game disc loader) - Press the start button while the disc is loaded.

Status LEDs: The xenogc has two status LEDs to indicate proper functionality. When the device restarts and the module chip is working, the red LED is active. The orange LED will illuminate when the device is successfully secured. If only the red LED is on, check your installation.

Note:

1. Directly replace the back cover of the port.

2. The memory card and Swiss boot disk are not included, this is just an adapter.

3. Before purchasing, please make sure that your NGC has Serial Port 2 and that you can start the latest software mentioned above. (NGC XENO)

4. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

5. Please allow 1-2cm measuring deviation due to manual measurement.

1*Card reader (excluding memory card)

1*CD boot disk

1*Chip xeno-gc (optional)

.