Security Gigabit Passive 8 Port PoE Injector 802.3af PoE Panel

Brand Name : zhangqing Model Number : ZQ-POEGI008 PoE Method : Mode B: 4/5+7/8- Input : 12-56V DC 2.1MM Output : 12-56V PER PORT(30W Max) Data Rate : 10/100 /1000Mbps Ethernet Cable : TIA/EIA 568 Cat.5 warranty : 1 year certification : CE/ ROHS Operating Temperature : 0°C~40°C Operating Humidity : 10RH Date in : Connects PC/HUB/Switch Security Gigabit 8 Port PoE Injector 802.3af PoE Patch Panel 1000Mbps For IP Camera Gigabit, Mode B 8 Port Injector without a power supply Power an IP camera, desktop phone, WiFi access point, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from a DC power source (power supply sold separately) and adds it to your Ethernet data cable (Cat5, Cat5e, Cat6) to your device. Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more. The ZQPOEIG008Power over Ethernet (POE) injector allows you to power up to 8 devices remotely over ethernet wiring up to 328 ft (100 meters) away. Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable and power devices such as cameras, VOIP phones, and WiFi access points. Connect the power supply you need (48v for phones, most cameras, 24v for Ubiquiti