REMOTE CONTROL RELAY SWITCH TRANSMITTER WITH RECEIVER MODULE RF 433MHZ

Remote Control Relay Switch Transmitter with Receiver Module RF 433MHz Ready Stok langsung order saja 100% unit BARU ----- Garansi quality CHECK sebelum kirim GARANSI toko 1BULAN ----- Dikirim dari JOGJA Garansi packing AMAN (GRATIS bubblewrap/kardus) Specification: Input voltage: 12V, RF working mode: superheterodyne • Receiver sensitivity: gt; 97 dbm • Transmission distance: gt; 100 m (open) • Decoding method: MCU software decoding • Remote storage: 20 • Support remote type: EV1527 learning code • Working mode: instantaneous, toggle, blocking delay (5s, 10s, 15s) • Output terminal: NO, NC, COM • PCB size: 35 x 29 x 18 mm (length, width, height) • Remote control battery: 2 x 3 V CR2016 button battery Note: The maximum input power is 250 V Remote programming - Clear code: Press the learn button on the receiver 8 times and the code will be reset. After clearing the password, the remote control needs to be recalibrated - Momentary mode - Learning code: (Switch-Press the remote control button to turn on, press again to turn off.) Press the learning button on the receiver twice, wait a while, the LED light will go out, and enter the learning state. - Press the learn button on the receiver 3 times, the LED (on the receiver) will flash 3 times. When the LED is on, press the button of the remote control (you want it to learn), press button A of the remote control, and the LED flashes 3 times. Press the remote control button B, the LED flashes 3 times. After 3 seconds, the LED indicator turns off, and the learning is successful. Package Included: 1x Receiving module 1x Remote control (with battery) ------ Terimakasih sudah mengunjungi toko kami Kita tunggu orderannya ya